News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Adding HEVC/H.265 support for NXP's i.MX 8M

February 17, 2021 by Benjamin Gaignard  |   Blog

Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.

Adding HEVC/H.265 support for NXP's i.MX 8M

Network adaptive streaming with Hwangsaeul

February 08, 2021 by Jakub Adam  |   Blog

Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.

Network adaptive streaming with Hwangsaeul

Trimming apitrace workload captures for better Mesa testing

February 01, 2021 by Gert Wollny  |   Blog

Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.

Trimming apitrace workload captures for better Mesa testing

GStreamer on Windows: adding WebRTC support to a gst-build install

January 28, 2021 by Aaron Boxer  |   Blog

Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?

GStreamer on Windows: adding WebRTC support to a gst-build install

Implementing a performance boosting algorithm in Coccinelle

January 21, 2021 by Jaskaran Singh  |   Blog

Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.

Implementing a performance boosting algorithm in Coccinelle

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

January 13, 2021 by Alyssa Rosenzweig  |   Blog

The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

Empathy first: Driving growth through people leadership

November 30, 2020 by Eleni Katsoula  |   Blog

This year, the global pandemic has put a strain on us all. Motivation can become hard to maintain, worries can cloud our minds. Now more than ever, it is important to try and connect with our colleagues.

Empathy first: Driving growth through people leadership

European R-Car Consortium Forum 2019

March 13, 2019 by Mark Filion  |   News & Events

Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!

European R-Car Consortium Forum 2019

Linux Kernel 5.0

March 06, 2019 by Gaël Portay  |   News & Events

The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!

Linux Kernel 5.0

Automotive Linux in Tokyo

March 04, 2019 by Mark Filion  |   News & Events

Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.

Automotive Linux in Tokyo

Embedded World 2019

February 20, 2019 by Mark Filion  |   News & Events

Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!

Embedded World 2019

FOSDEM 2019

January 23, 2019 by Mark Filion  |   News & Events

In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!

FOSDEM 2019

Linux Kernel 4.20

January 07, 2019 by Fabien Lahoudere  |   News & Events

A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.

Linux Kernel 4.20

Outreachy - Round 17

December 20, 2018 by Mark Filion  |   News & Events

As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for…

Outreachy - Round 17

ESE Kongress

December 04, 2018 by Mark Filion  |   News & Events

This week, Collaborans will be taking part, and speaking, in this year's ESE Kongress, Germany's largest congress for professional embedded software engineering.

ESE Kongress

FOSS in Toulouse

November 16, 2018 by Mark Filion  |   News & Events

After a great time in Vancouver, Collaborans are headed this weekend to southern France to attend and speak at the 2018 edition of Capitole du Libre, a weekend dedicated to free and Open Source software!

FOSS in Toulouse

Linux Plumbers in Vancouver

November 12, 2018 by Mark Filion  |   News & Events

Widely recognized as the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond, this year's edition of LPC is jam-packed with microconferences, a refereed track, a Kernel Summit track, multiple BoFs, and more.

Linux Plumbers in Vancouver

Daniel Stone featured in Linux Format!

November 07, 2018 by Mark Filion  |   News & Events

While our regular column (this time on Video4Linux, written by Ezequiel Garcia) is alive and well in this month's issue of LXF, there's also something else worth highlighting: a 6-page interview with none other than Collabora's Graphics lead, Daniel Stone!

Daniel Stone featured in Linux Format!

Edinburgh, continued!

October 25, 2018 by Mark Filion  |   News & Events

After three great days attending and catching up with the community at ELCE, Collaborans are continuing their stay in Edinburgh to take part in the GStreamer Conference & Hackfest, the Linux Media Summit and the Automated Testing Summit.

Edinburgh, continued!

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Linaro Virtual Connect

8-10 September, Online

XDC 2021

15-17 September, Online

Linux Plumbers Conference

20-24 September, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.