October 15, 2018 by Mark Filion | News & Events
This week, two Collaborans will be in Dresden, Germany to take part in the AGL All Member Meeting. George Kiagiadakis and Daniel Stone will be in attendance, with the former also giving a presentation on the latest happenings in upstream multimedia.
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 17, 2017 by Simon McVittie | Blog
Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!
July 24, 2017 by Robert Foss | Blog
More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…
July 18, 2017 by Alexandros Frantzis | Blog
Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…
June 29, 2017 by Robert Foss | Blog
Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.
June 20, 2017 by Sjoerd Simons | Blog
At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.
June 13, 2017 by Helen Koike | Blog
The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!
June 05, 2017 by Robert Foss | Blog
GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
May 04, 2021 by Ariel D'Alessandro | News & Events
With their latest contributions all around the kernel, notably to the Video4Linux APIs and hardware enablement, Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
March 25, 2021 by Boris Brezillon | News & Events
The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.
March 22, 2021 by Mark Filion | News & Events
Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.
March 10, 2021 by Erik Faye-Lund | News & Events
One year ago, we announced a new partnership with Microsoft to build OpenGL mapping layers to DirectX 12. Today, we're excited to share that the we have passed the OpenGL 3.3 conformance tests, and have now upstreamed the D3D12 driver in Mesa 3D!
February 19, 2021 by Alexandros Frantzis | News & Events
Two months ago we announced a first proposal for a Wayland driver for Wine, the compatibility layer for Windows applications. Here's an update on this effort, which contains more details and instructions for building and running the Wayland driver.
February 17, 2021 by Ezequiel Garcia | News & Events
The first kernel release of 2021 brings a number of highlights contributed by Collaborans, including the new Syscall User Dispatch mechanism, and the destaging of both the H.264 stateless decoding interface and the Rockchip ISP driver.
February 15, 2021 by Jakob Bornecrantz | News & Events
Monado, the OpenXR runtime for Linux, is now officially conformant! In recognition of this milestone, a first major release version of the OpenXR runtime for Linux is now available, bringing with it a SteamVR driver!
January 19, 2021 by Mark Filion | News & Events
Join us as our 2021 conference schedule gets underway this weekend with the virtual editions of linux.conf.au and MiniDebConf India! Collaborans will be giving talks on recent projects including futex2, and Open Source AI video analytics with Panfrost.
December 15, 2020 by Alexandros Frantzis | News & Events
After several months of work, we are excited to announce a first proposal for a Wayland driver for Wine. The proposal is in the form of an RFC, in order to explore how to best move forward with the upstreaming and further development of the driver.
Here are the events we'll be attending in the coming weeks – come say hello!
March 8-9, Berlin, Germany
March 14-16, Nuremberg, Germany
April 24-26, Brno, Czech Republic
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português