June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 22, 2016 by Mark Filion | News and Events
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This week, we're introducing a new QA tool: a GStreamer tracer to track leaked objects.
June 20, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 07, 2016 by Mark Filion | News and Events
Collabora will be exhibiting at InfoComm 2016, the largest, most exciting event in the United States focused on the pro-AV industry, in Last Vegas on June 8-10, 2016.
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Jason Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Jason Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 05, 2022 by Mateo de Mayo | Blog
Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.
March 30, 2022 by Xavier Claessens | Blog
When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA