September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 10, 2021 by Lubosz Sarnecki | Blog
This summer, Christoph Haag and I had the pleasure of taking part in Google Summer of Code as mentors for xrdesktop, the Open Source project bringing the Linux desktop to VR on Valve's SteamVR & Monado. Here's what was accomplished.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 23, 2021 by Daniel Almeida | Blog
Earlier this year, from January to April 2021, I worked on adding support for stateless decoders for GStreamer as part of a multimedia internship at Collabora. Here's a recap of this completed work.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
July 26, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.7 was released this week with a total of 36 contributions from five Collabora engineers. It includes the first contributions from Helen as Collaboran and the first ever contributions on the kernel from Robert Foss. Here are some of the…
July 08, 2016 by Nicolas Dufresne | Blog
For a long time I believed that echo cancellers had no place inside GStreamer. The theory was that GStreamer was too high level and would never be able to provide accurate enough delay information for any canceller to work.
July 04, 2016 by Lubosz Sarnecki | Blog
The dawn of VR video players demand new features in terms of projection and hardware access. In his recent R&D work, a Collaboran implemented a way to view spherical videos with GStreamer on a Virtual Reality headset. In this article, he gives his thoughts…
June 27, 2016 by Frédéric Plourde | Blog
I’ve been fortunate enough lately to attend the largest virtual reality professional event/conference : SVVR. This virtual reality conference’s been held each year in the Silicon Valley for 3 years now. This year, it showcased more than 100 VR companies…
June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 19, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
January 25, 2024 by Marcus Edel | News & Events
By creating a real-time AI chatbot communication system using WhisperLive and WhisperSpeech, we have addressed the unnatural delay in current bot interactions for seamless conversation.
January 18, 2024 by Kara Bembridge | News & Events
With many dedicated souls willing to endure a FOSDEM queue, Collabora's engineers will be giving 6 talks spread out amongst multiple devrooms including Open Media and Testing & Continuous delivery.
January 11, 2024 by Eugen Hristev | News & Events
Collabora's kernel team made a number of key contributions including a new kselftest for verifying driver probe of Devicetree-based platforms, multiple improvements to further improve support for MediaTek SoCs found in Chromebooks, and more.
December 21, 2023 by Marius Vlad | News & Events
Weston 13.0 brings multiple fixes and important changes, notably the ability to load multiple backends simultaneously. This can be used to load VNC, RDP, or PipeWire backends for remote access alongside the native DRM backend.
December 20, 2023 by Faith Ekstrand | News & Events
As 2023 draws to a close, I wanted to give a quick update on NVK, what's happened this year, and where we'll be headed in 2024. While previous posts have focused primarily on the technical details, this post will be more geared towards users.
December 07, 2023 by Mark Filion | News & Events
Collabora is headed to California to take part in the inaugural edition of AI.dev: Open Source GenAI & ML Summit, a new event which aims to bring together the brightest developers from around the world to shape the trajectory of open source AI.
November 27, 2023 by George Kiagiadakis | News & Events
It is with the utmost excitement that we witness the release of PipeWire 1.0, the first officially stable release of this noteworthy inter-process multimedia streaming framework after many years of development.
November 21, 2023 by Kara Bembridge | News & Events
This week, the Debian project takes over Cambridge as MiniDebConf kicks off right in our own British backyard! Organized by Debian project members, MiniDebConfs aim to achieve similar objectives to those of the annual Debian conference, DebConf.
November 20, 2023 by Faith Ekstrand | News & Events
As of today, NVK is now an officially conformant implementation of the Vulkan 1.0 API on NVIDIA Turing hardware. This is the first time any Nouveau driver has gotten the Khronos conformance badge on any API.
November 09, 2023 by Kara Bembridge | News & Events
To ensure the Linux kernel is running smoothly, it requires maintenance from a variety of levels. Those working on the lower levels, or the plumber layers, of the kernel will have a chance to convene next week at the annual Linux Plumbers Conference.
November 02, 2023 by Vineet Suryan | News & Events
MLBench enables developers and maintainers to effortlessly gauge how their frameworks perform compared to other implementations, prior code versions, or across different boards, with respect to both runtime performance and other metrics.
October 31, 2023 by Laura Nao | News & Events
Linux Kernel 6.6 has arrived, bringing a significant amount of new features and performance enhancements. Collabora has actively contributed many patches, including work on MediaTek and Rockchip.
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português