August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Jason Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
October 03, 2019 by Pekka Paalanen | Blog
What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.
August 28, 2019 by Gert Wollny | Blog
With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.
August 06, 2019 by Rohan Garg | Blog
Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.
August 02, 2019 by Ryan Pavlik | Blog
As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.
July 25, 2019 by Erik Faye-Lund | Blog
There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!
July 18, 2019 by Nicolas Dufresne | Blog
A little over a month and a half ago, Collaborans including Aaron Boxer, George Kiagiadakis, Guillaume Desmottes, Stéphane Cerveau and myself took part in the GStreamer Spring Hackfest in Oslo. This year, the hackfest was kindly hosted by Pexip.
June 26, 2019 by Alyssa Rosenzweig | Blog
In my last Panfrost blog post, I announced my internship goal: improve Panfrost to run GNOME3. GNOME is a popular Linux desktop making heavy use of OpenGL; to use GNOME with only free and open source software on a machine with Mali graphics, Panfrost…
June 24, 2019 by Andrzej Pietrasiewicz | Blog
Dummy_hcd which consists of a software-emulated host controller and a UDC chip. In other words, this means you can play with USB gadgets even if you don't have the appropriate hardware, because your PC can act as both a USB host and a USB device.
June 18, 2019 by Frédéric Danis | Blog
Both the Le Potato and OrangePi Zero Plus2 boards are already supported by Armbian. But how do you get a minimal Debian upstream image with only the packages you want? Debos is the perfect tool to do this.
June 05, 2019 by Alyssa Rosenzweig | Blog
Years ago, I joined the open-source community with a passion and a mission: to enable equal access to high-quality computing via open-source software. With this mission, I co-founded Panfrost, aiming to create an open-source driver for the Mali GPU.
May 23, 2019 by Ezequiel Garcia | Blog
With virtme, you can run a custom built kernel on top of our running root filesystem. In this post, we explore another example of virtme in action, and see how to test Video4Linux2 drivers on bleeding edge GStreamer builds.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
Here are the events we'll be attending in the coming weeks – come say hello!
July 15-16, Oslo, Norway
July 17-24, Prizren, Kosovo
July 30-31, Taiwan
August 8-11, Vancouver, Canada