News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Why HDCP support in Weston is a good thing

October 03, 2019 by Pekka Paalanen  |   Blog

What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.

Why HDCP support in Weston is a good thing

Open graphics in Montreal

September 30, 2019 by Mark Filion  |   News & Events

Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

Open graphics in Montreal

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Virglrenderer and the state of virtualized virtual worlds

August 28, 2019 by Gert Wollny  |   Blog

With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.

Virglrenderer and the state of virtualized virtual worlds

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Panfrost & Wayland on a Rockchip board

August 06, 2019 by Rohan Garg  |   Blog

Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.

Panfrost & Wayland on a Rockchip board

What's new in OpenXR 1.0 & Monado?

August 02, 2019 by Ryan Pavlik  |   Blog

As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.

What's new in OpenXR 1.0 & Monado?

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

Tracing user space and OS interactions

April 10, 2017 by Gabriel Krisman Bertazi  |   Blog

Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.

Tracing user space and OS interactions

Ubuntu rejoins the GNOME fold

April 05, 2017 by Daniel Stone  |   Blog

Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.

Ubuntu rejoins the GNOME fold

Android: Enabling mainline graphics

March 29, 2017 by Robert Foss  |   Blog

Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.

Android: Enabling mainline graphics

Linux block I/O tracing

March 28, 2017 by Gabriel Krisman Bertazi  |   Blog

Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.

Linux block I/O tracing

GTK+ Hackfest 2017: D-Bus communication with containers

March 24, 2017 by Simon McVittie  |   Blog

At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.

GTK+ Hackfest 2017: D-Bus communication with containers

Performance analysis in Linux

March 21, 2017 by Gabriel Krisman Bertazi  |   Blog

Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.

Performance analysis in Linux

Kernel debugging with QEMU: An overview of tools available

March 13, 2017 by Frédéric Dalleau  |   Blog

Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.

Kernel debugging with QEMU: An overview of tools available

Quick hack: Removing the Chromebook Write-Protect screw

March 08, 2017 by Robert Foss  |   Blog

Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.

Quick hack: Removing the Chromebook Write-Protect screw

A flurry of open source graphics milestones

March 01, 2017 by Daniel Stone  |   Blog

The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.

A flurry of open source graphics milestones

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Linaro Virtual Connect

8-10 September, Online

XDC 2021

15-17 September, Online

Linux Plumbers Conference

20-24 September, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.