July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
July 03, 2025 by George Kiagiadakis | Blog
As part of the activities Embedded Recipes in Nice, France, Collabora hosted a PipeWire workshop/hackfest, an opportunity for attendees to meet face-to-face with PipeWire developers and participate in direct discussions about the future of PipeWire.
June 25, 2025 by Tathagata Roy | Blog
In collaboration with Inria, the French Institute for Research in Computer Science and Automation, Tathagata Roy shares the progress made over the past year on the CoccinelleForRust project, co-sponsored by Collabora
June 23, 2025 by Nicolas Dufresne | Blog
Last month in Nice, active media developers came together for the annual Linux Media Summit to exchange insights and tackle ongoing challenges in the media subsystem. Here’s a brief summary of the key discussions and upcoming areas of focus.
June 09, 2025 by Gustavo Noronha | Blog
In this final article based on Matt Godbolt's talk on making APIs easy to use and hard to misuse, I will discuss locking, an area where C++ has produced some interesting ideas, most notably something called RAII — Resource Acquisition Is Initialization.
May 21, 2025 by Gustavo Noronha | Blog
In this second article of a three-part series, I look at how Matt Godbolt uses modern C++ features to try to protect against misusing an API that deals with destructive state transition based on a talk he gave on making code easy to use and hard to misuse.
May 12, 2025 by Aaron Boxer | Blog
Powerful video analytics pipelines are easy to make when you're well-equipped. Combining GStreamer and Machine Learning frameworks are the perfect duo to run complex models across multiple streams.
May 06, 2025 by Gustavo Noronha | Blog
Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.
April 29, 2025 by George Kiagiadakis | Blog
Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.
April 24, 2025 by Martyn Welch | Blog
Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.
February 27, 2025 by George Kiagiadakis | Blog
If you are considering deploying BlueZ on your embedded Linux device, the benefits in terms of flexibility, community support, and long-term maintainability make it a worthwhile investment.
January 15, 2025 by Gert Wollny | Blog
With VirGL, Venus, and vDRM, virglrenderer offers three different approaches to obtain access to accelerated GFX in a virtual machine. Here are the latest updates around each of these approaches.
December 19, 2024 by Vineet Suryan | Blog
In the world of deep learning optimization, two powerful tools stand out: torch.compile, PyTorch’s just-in-time (JIT) compiler, and NVIDIA’s TensorRT, a platform for high-performance deep learning inference.
September 06, 2017 by Sebastian Reichel | News & Events
Linux Kernel 4.13 is out, with 12 Collabora developers having contributed, pairing up with 4.12 as another kernel release with our highest number of Collabora developers!
August 04, 2017 by Mark Filion | News and Events
Collabora is proud to once again be a Gold Sponsor of this year's DebConf, the annual Debian conference for developers! This year's week-long conference takes place from August 6 to 12 at Collège de Maisonneuve in beautiful Montréal, where one of our…
July 27, 2017 by Mark Filion | News and Events
Over the next few days, Collaborans will be getting back on the road and attending two events, one in Manchester and one in Los Angeles. We're also very pleased to be sponsoring one of these events!
July 04, 2017 by Martyn Welch | News & Events
Linux Kernel 4.12 is out, with 12 Collabora developers having contributed, a new record number of developers contributing to a single kernel release for Collabora!
June 27, 2017 by Mark Filion | News & Events
Our worldwide team of Open Source engineers and developers continues to grow with new additions in Core, Graphics & Web! Welcome Denis Pynkin, Alexandros Frantzis and Santosh Mahto!
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
May 01, 2017 by Helen Fornazier | News & Events
Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.
April 18, 2017 by Mark Filion | News and Events
Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
Here are the events we'll be attending in the coming weeks – come say hello!
June 30-July 4, Nantes, France
July 9-10, Berlin, Germany
July 14-20, Brest, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português