September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
May 22, 2024 by Faith Ekstrand | News & Events
Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle.
May 16, 2024 by Faith Ekstrand | News & Events
This week we merged support for the VK_EXT_image_drm_format_modifier extension in NVK, the new open-source Vulkan driver for NVIDIA hardware. We've also back-ported the code to the Mesa 24.1 staging branch, part of the upcoming Mesa 24.1 release.
May 14, 2024 by Nícolas Prado | News & Events
Collabora's engineers continue to be involved in the hardware enablement for a few different system-on-chips (SoCs) and platforms, and have also contributed significant improvements to kernel testing.
May 10, 2024 by Ludovico de Nittis | News & Events
Highlighting some of the key changes Collabora worked on with Valve to improve the system update tooling on SteamOS, including the move to Desync, making applying system updates significantly faster and more reliable.
May 09, 2024 by Kara Bembridge | News & Events
This year will be Collabora's first time exhibiting at IOTSWC, in partnership with STMicroelectronics. Collabora will be showcasing how the STM32MP2 is an ideal chip to enable edge AI solution in industrial environments.
April 29, 2024 by Aaron Boxer | News & Events
GStreamer's support for diverse hardware and software platforms extends to its upstream Machine Learning capabilities, exemplified by its cross-platform ONNX Runtime implementation.
April 22, 2024 by Kara Bembridge | News & Events
As part of our commitment to social responsibility, we've been part of the 1% for the Planet Network since 2022. The environmental partners we support help to better the planet.
April 17, 2024 by Frederic Plourde | News & Events
Monado, the cross-platform open source XR runtime, has recently received significant updates to align with the features and specifications of OpenXR 1.1, ensuring compatibility and optimal performance for developers and users alike.
April 11, 2024 by Kara Bembridge | News & Events
Adhering to the fundamentals of open source, the Atari VCS OS is based on Debian using the Apertis infrastructure, and the graphics rely on Weston as its Wayland compositor.
April 10, 2024 by Mark Filion | News & Events
Using TensorFlow Lite models optimized for the STM3MP2 NPU along with an upstream-ready H.264 encoder (Video4Linux2), this demo showcases GStreamer's all-new analytic metadata framework.
April 08, 2024 by Xavier Claessens | News & Events
GStreamer 1.24 was recently released, and with it came with a new plugin to help separate pipelines into different processes.
April 05, 2024 by Kara Bembridge | News & Events
Seattle is hosting this year's Embedded Open Source Summit, the umbrella conference for a collection of open source events. This is the premier space for the open source community and we'll be there with 6 talks!
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português