December 20, 2019 by Alyssa Rosenzweig | Blog
If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!
December 09, 2019 by Julian Bouzas | Blog
PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.
December 02, 2019 by Enric Balletbò i Serra | News & Events
Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.
November 26, 2019 by Aaron Boxer | Blog
With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.
November 20, 2019 by Jassie Badion | News & Events
As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!
October 30, 2019 by Mark Filion | News & Events
Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.
October 28, 2019 by Guillaume Tucker | News & Events
The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.
October 25, 2019 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.
October 24, 2019 by Erik Faye-Lund | Blog
I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.
October 09, 2019 by Dafna Hirschfeld | Blog
Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.
October 03, 2019 by Pekka Paalanen | Blog
What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.
September 30, 2019 by Mark Filion | News & Events
Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 08, 2021 by Jakub Adam | Blog
Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.
February 01, 2021 by Gert Wollny | Blog
Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.
January 28, 2021 by Aaron Boxer | Blog
Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?
February 26, 2018 by Mark Filion | News & Events
This week, we're in Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-170!
January 29, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.15 was released yesterday, and it once again contained patches contributed by Collabora, including bigger patchsets like V4L2 Explicit Synchronization and UTF-8 case insensitive lookups for EXT4.
January 26, 2018 by Mark Filion | News & Events
Brussels, here we come! We're thrilled to be sponsoring this year's edition of FOSDEM, taking place in just over a week's time (February 3 & 4), at the Université Libre de Bruxelles. Come say hello, or catch one of a dozen talks given by Collaborans!
December 19, 2017 by Mark Filion | News & Events
For a second time this year, Collabora is proud to be sponsoring the latest round (Round 15) of Outreachy internships! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the December 2017 - March 2018 semester.
December 14, 2017 by Jassie Badion | News & Events
With less than 12 days to go before Christmas, here are 12 reasons, from 12 different people who became Collaborans this year, on why you should consider joining our team!
November 28, 2017 by Mark Filion | News & Events
We're delighted to be one of the 33 new members of the Secure Reliable Transport (SRT) Alliance, a group dedicated to accelerating interoperability of video streaming solutions and fostering collaboration with industry leaders to achieve lower latency…
November 16, 2017 by Mark Filion | News & Events
We're headed to France’s southern Occitanie region to attend and sponsor the 6th edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 13, 2017 by Gabriel Krisman Bertazi | News & Events
Linux Kernel 4.14 is out, and once again Collabora developers were very active, contributing nearly 200 patches, reviews & sign-offs combined during this development cycle!
November 10, 2017 by Mark Filion | News & Events
We're very excited to be sponsoring and speaking at the very first Linux Developer Conference Brazil, taking place on November 11 at the Instituto de Computação in Campinas!
November 08, 2017 by Mark Filion | News & Events
On November 8, we'll be in Düsseldorf, Germany, to take part & exhibit at the 1st edition of the Renesas European R-Car Consortium Forum, a one-day event aimed at bringing together OEMs and Tier1s to discuss the future of car mobility.
October 20, 2017 by Mark Filion | News & Events
Following a weekend at the GStreamer Conference, Collabora will be continuing its week-long stay in Prague by sponsoring, exhibiting and speaking at Embedded Linux Conference Europe 2017.
October 19, 2017 by Mark Filion | News & Events
We're thrilled to be once again a platinum sponsor of the annual GStreamer Conference, taking place this weekend (October 21 & 22) at Node5 in Prague, Czech Republic. Come say hello, or catch one of the five presentations given by Collaborans!
Here are the events we'll be attending in the coming weeks – come say hello!
April 9-11, Nuremberg, Germany
April 9-11, Las Vegas, USA
April 13-17, Las Vegas, USA
April 16-18, Seattle, USA
April 22-26, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português