January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
October 08, 2021 by Nícolas F. R. A. Prado | Blog
Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.
September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
July 24, 2017 by Robert Foss | Blog
More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…
July 18, 2017 by Alexandros Frantzis | Blog
Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…
June 29, 2017 by Robert Foss | Blog
Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.
June 20, 2017 by Sjoerd Simons | Blog
At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.
June 13, 2017 by Helen Koike | Blog
The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!
June 05, 2017 by Robert Foss | Blog
GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
September 29, 2014 by Guy Lunardi | News and Events
Düsseldorf, Germany October 16-17, 2014: the GStreamer Conference is a conference for developers, decision-makers, community members, industry partners, and anyone else interested in the GStreamer multimedia framework or Open Source and cross-platform…
August 14, 2014 by Guy Lunardi | News and Events
Amsterdam, The Netherlands September 12-16, 2014: the essential global meeting place for everyone engaged in creating, managing and delivering the future of electronic media and entertainment technology and content. Collabora booth #8.B38c
August 11, 2014 by Guy Lunardi | News and Events
Vancouver, Canada August 12-14, 2014: SIGGRAPH, visit ARM at Booth #933 in the Mobile Pavilion to meet with Collabora. SIGGRAPH attracts 20,000 international attendees from across the globe and many creative and technical disciplines. It is the only…
August 05, 2014 by Guy Lunardi | News and Events
Cambridge, England August 5-8, 2014: With so many silicon vendors and OEMs visiting Cambridge England, August 5-8 transforms the univeristy town into the world's center of innovation for one week. Cambridge in August attracts international leaders in…
July 17, 2014 by Guy Lunardi | News and Events
Raspberry Pi Today interviews Collabora's Daniel Stone about Collabora and the Raspberry Pi Foundation's work on Wayland and WebKit.
June 19, 2014 by Guy Lunardi | News and Events
Tokyo, Japan July 1-2, 2014: The Automotive Linux Summit will bring together the most innovative minds from automotive expertise and open-source excellence.
June 19, 2014 by Guy Lunardi | News and Events
Collabora introduces our new brand and logo
Here are the events we'll be attending in the coming weeks – come say hello!
October 1-7, Barcelona, Spain
October 4-6, Minneapolis, MN, USA
October 11-13, London, UK
August 8-11, Phoenix, AZ, USA