January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 08, 2021 by Jakub Adam | Blog
Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.
February 01, 2021 by Gert Wollny | Blog
Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.
January 28, 2021 by Aaron Boxer | Blog
Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?
January 21, 2021 by Jaskaran Singh | Blog
Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.
January 13, 2021 by Alyssa Rosenzweig | Blog
The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.
November 30, 2020 by Eleni Katsoula | Blog
This year, the global pandemic has put a strain on us all. Motivation can become hard to maintain, worries can cloud our minds. Now more than ever, it is important to try and connect with our colleagues.
November 19, 2020 by Pekka Paalanen | Blog
Wayland is still lacking proper consideration for color management & support for high dynamic range (HDR) imagery. However, a group of developers has begun an effort to fix this situation. This is their story.
November 06, 2020 by Mike Blumenkrantz | Blog
This week marks two years since the OpenGL implementation on Vulkan was initially announced. Since then, and especially over the past few months, much has progressed with many new features being added and performance now close to native (95%!).
November 03, 2020 by Alyssa Rosenzweig | Blog
Since our previous update on Panfrost, the open source stack for Arm's Mali Midgard and Bifrost GPUs, we've focused on taking our driver from its reverse-engineered origins on Midgard to a mature stack.
October 20, 2020 by Gustavo Noronha | Blog
The concept of a remote internship may raise some doubts, or even red flags, for many students, as would remote jobs for professionals. As a result, we pay extra attention to how we onboard and support our interns.
March 31, 2020 by Helen Koike | News & Events
Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.
March 30, 2020 by Mark Filion | News & Events
This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!
March 24, 2020 by Erik Faye-Lund | News & Events
Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.
February 25, 2020 by Jakob Bornecrantz | News & Events
Ever since announcing the project at GDC 2019, we have been working on improving the full open source XR stack to a usable state. Today, we are very happy to tag version 0.1 of the Monado OpenXR runtime for Linux!
February 12, 2020 by Jakub Adam | News & Events
With the advent of 5G networks, it's now possible to stream high quality video in real-time with a very low latency that wasn't possible with the past generations of mobile networks.
January 30, 2020 by Sebastian Reichel | News & Events
With the 5.5 kernel released earlier this week, here's a detailed look at Collabora’s contributions, including work to improve upstream support of peripherals used together with the i.MX 6 family of processors.
January 23, 2020 by Mark Filion | News & Events
In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans!
January 16, 2020 by Erica Ryoo | News & Events
What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!
December 02, 2019 by Enric Balletbò i Serra | News & Events
Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.
November 20, 2019 by Jassie Badion | News & Events
As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!
October 30, 2019 by Mark Filion | News & Events
Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.
October 28, 2019 by Guillaume Tucker | News & Events
The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português