April 18, 2017 by Mark Filion | News and Events
Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 07, 2017 by Mark Filion | News and Events
Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!
December 15, 2022 by Italo Nicola | Blog
Machine learning is increasingly seeing more applications and it's important to have FOSS options to accelerate such workloads. With that in mind, we began an effort earlier this year to get a TFLite model running on a VIM3 NPU using Etnaviv and OpenCL.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
August 02, 2019 by Mark Filion | News & Events
This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.
July 30, 2019 by Lubosz Sarnecki | News & Events
Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.
July 25, 2019 by Andrej Shadura | News & Events
With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!
July 17, 2019 by Gabriel Krisman Bertazi | News & Events
With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.
June 21, 2019 by Jassie Badion | News & Events
For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!
May 30, 2019 by Mark Filion | News & Events
A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.
May 09, 2019 by André Almeida | News & Events
Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.
May 06, 2019 by Aaron Boxer | News & Events
After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.
April 09, 2019 by Nicolas Dufresne | News & Events
Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.
March 29, 2019 by Mark Filion | News & Events
Next week, Collaborans will be in Bangkok, Thailand, to participate in the 25th edition of Linaro Connect, a gathering of the world's leading open source engineers working on Arm. Tomeu Vizoso and Gustavo Padovan will be in attendance to present Panfrost.
March 18, 2019 by Jakob Bornecrantz | News & Events
Following the release of the OpenXR 0.90 Provisional Specification by The Khronos Group, Collabora is proud to announce Monado, an open source implementation of the newly released OpenXR spec.
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec