News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

April 20, 2021 by Marcus Edel  |   Blog

As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Adding HEVC/H.265 support for NXP's i.MX 8M

February 17, 2021 by Benjamin Gaignard  |   Blog

Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.

Adding HEVC/H.265 support for NXP's i.MX 8M

Network adaptive streaming with Hwangsaeul

February 08, 2021 by Jakub Adam  |   Blog

Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.

Network adaptive streaming with Hwangsaeul

Trimming apitrace workload captures for better Mesa testing

February 01, 2021 by Gert Wollny  |   Blog

Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.

Trimming apitrace workload captures for better Mesa testing

GStreamer on Windows: adding WebRTC support to a gst-build install

January 28, 2021 by Aaron Boxer  |   Blog

Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?

GStreamer on Windows: adding WebRTC support to a gst-build install

Implementing a performance boosting algorithm in Coccinelle

January 21, 2021 by Jaskaran Singh  |   Blog

Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.

Implementing a performance boosting algorithm in Coccinelle

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

January 13, 2021 by Alyssa Rosenzweig  |   Blog

The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Laval Virtual: OpenXR master class in VR!

May 18, 2020 by Mark Filion  |   News & Events

A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.

Laval Virtual: OpenXR master class in VR!

xrdesktop 0.14 with OpenXR support is here!

May 08, 2020 by Lubosz Sarnecki  |   News & Events

Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.

xrdesktop 0.14 with OpenXR support is here!

Service process and out of process compositing in Monado

April 30, 2020 by Lubosz Sarnecki  |   News & Events

A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.

Service process and out of process compositing in Monado

Say hello to the newest Collaborans!

April 21, 2020 by Erica Ryoo  |   News & Events

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!

Say hello to the newest Collaborans!

Projects and progress in Linux kernel 5.6

March 31, 2020 by Helen Koike  |   News & Events

Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.

Projects and progress in Linux kernel 5.6

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

March 30, 2020 by Mark Filion  |   News & Events

This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

Introducing OpenCL and OpenGL on DirectX

March 24, 2020 by Erik Faye-Lund  |   News & Events

Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.

Introducing OpenCL and OpenGL on DirectX

Monado OpenXR runtime developer update

February 25, 2020 by Jakob Bornecrantz  |   News & Events

Ever since announcing the project at GDC 2019, we have been working on improving the full open source XR stack to a usable state. Today, we are very happy to tag version 0.1 of the Monado OpenXR runtime for Linux!

Monado OpenXR runtime developer update

Low latency streaming of security video feeds with SRT and GStreamer

February 12, 2020 by Jakub Adam  |   News & Events

With the advent of 5G networks, it's now possible to stream high quality video in real-time with a very low latency that wasn't possible with the past generations of mobile networks.

Low latency streaming of security video feeds with SRT and GStreamer

Linux Kernel 5.5

January 30, 2020 by Sebastian Reichel  |   News & Events

With the 5.5 kernel released earlier this week, here's a detailed look at Collabora’s contributions, including work to improve upstream support of peripherals used together with the i.MX 6 family of processors.

Linux Kernel 5.5

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

GStreamer

October 7-10, Montreal, Quebec

XDC

October 9-11, Montreal, Quebec

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.