March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 07, 2017 by Mark Filion | News and Events
Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 21, 2017 by Mark Filion | News and Events
Starting today, and for the next few days, Collaborans will be taking part in this year's Embedded Linux Conference North America, the "premier vendor-neutral technical conference for companies and developers using Linux in embedded products".
February 20, 2017 by Gustavo Padovan | News and Events
Linux Kernel 4.10 is out, and this time Collabora contributed a total of 39 patches by 10 different developers.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
February 09, 2017 by Varad Gautam | Blog
Over the past few weeks, I have been working for Collabora on plumbing DRM format modifier support across a number of components in the graphics stack. This post documents the work and the related consequences/implications.
October 02, 2023 by Daniel Almeida | Blog
This second installment explores the Rust libraries Collabora developed to decode video and how these libraries are used within ARCVM to eventually remove CrosVM's dependency on the Chrome codec stack.
September 27, 2023 by Edmund Smith | Blog
Why is creating object graphs hard in Rust? In part 1, we looked at a basic pattern, where two types of objects refer to one another. In this part we'll follow up in more detail and examine the different approaches that can be applied.
September 13, 2023 by Jakub Piotr Clapa | Blog
Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.
August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
December 15, 2020 by Alexandros Frantzis | News & Events
After several months of work, we are excited to announce a first proposal for a Wayland driver for Wine. The proposal is in the form of an RFC, in order to explore how to best move forward with the upstreaming and further development of the driver.
December 14, 2020 by Ricardo Cañuelo Navarro | News & Events
Even amidst the chaos and uncertainty that 2020 brought, Linux Kernel development keeps moving forward at a constant and relentless pace. Collabora remains active, developing, maintaining, documenting and testing many parts of the kernel.
November 12, 2020 by Mark Filion | News & Events
Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!
November 02, 2020 by Jakob Bornecrantz | News & Events
Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.
October 22, 2020 by Mark Filion | News & Events
The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!
October 22, 2020 by Mylène Josserand | News & Events
Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.
October 06, 2020 by Stéphane Cerveau | News & Events
A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.
September 15, 2020 by Mark Filion | News & Events
The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
Here are the events we'll be attending in the coming weeks – come say hello!
April 9-11, Nuremberg, Germany
April 9-11, Las Vegas, USA
April 13-17, Las Vegas, USA
April 16-18, Seattle, USA
April 22-26, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português