January 23, 2020 by Mark Filion | News & Events
In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans!
January 16, 2020 by Erica Ryoo | News & Events
What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!
December 20, 2019 by Alyssa Rosenzweig | Blog
If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!
December 09, 2019 by Julian Bouzas | Blog
PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.
December 02, 2019 by Enric Balletbò i Serra | News & Events
Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.
November 26, 2019 by Aaron Boxer | Blog
With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.
November 20, 2019 by Jassie Badion | News & Events
As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!
October 30, 2019 by Mark Filion | News & Events
Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.
October 28, 2019 by Guillaume Tucker | News & Events
The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.
October 25, 2019 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.
October 24, 2019 by Erik Faye-Lund | Blog
I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 07, 2020 by George Kiagiadakis | Blog
An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.
March 20, 2015 by Guy Lunardi | News and Events
Orlando, USA - from 17/06/2015 to 19/06/2015: we'll be exhibiting at InfoComm 2015, the largest event for professional AV in the world. Collabora booth 5469
March 18, 2015 by Guy Lunardi | News and Events
Stuttgart, Germany - From 22/04/2015 to 22/04/2015: We will be exhibiting at the GENIVI Demonstration Showcase during the All Member Meeting.
January 15, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands February 10-12, 2015: the world’s largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth #11-E61
December 17, 2014 by Guy Lunardi | News and Events
Las Vegas, USA - January 6th - 9th, 2015: Collabora will be participating with key partners at CES 2015, the world’s gathering place for all who thrive on the business of consumer technologies.
December 16, 2014 by Guy Lunardi | News and Events
Cambridge, UK January 25-29, 2015: Hosted at Collabora's UK headquarters, the Event Developer Hackfest 2015 aims to continue the tradition of pushing forward roadmaps for the toolkit and developer experience.
November 24, 2014 by Guy Lunardi | News and Events
A Coruña, Spain - December 7-10, 2014: Collabora are pleased to be sponsoring and attending the upcoming Web Engines Hackfest, which will bring together members from all parts of the Web Platform community.
October 21, 2014 by Guy Lunardi | News and Events
Software engineering, quality assurance, project management, and Finance are all looking for great and talented people. Please check us out. https://www.collabora.com/about-us/careers.html
September 29, 2014 by Guy Lunardi | News and Events
Düsseldorf, Germany October 16-17, 2014: the GStreamer Conference is a conference for developers, decision-makers, community members, industry partners, and anyone else interested in the GStreamer multimedia framework or Open Source and cross-platform…
August 14, 2014 by Guy Lunardi | News and Events
Amsterdam, The Netherlands September 12-16, 2014: the essential global meeting place for everyone engaged in creating, managing and delivering the future of electronic media and entertainment technology and content. Collabora booth #8.B38c
August 11, 2014 by Guy Lunardi | News and Events
Vancouver, Canada August 12-14, 2014: SIGGRAPH, visit ARM at Booth #933 in the Mobile Pavilion to meet with Collabora. SIGGRAPH attracts 20,000 international attendees from across the globe and many creative and technical disciplines. It is the only…
August 05, 2014 by Guy Lunardi | News and Events
Cambridge, England August 5-8, 2014: With so many silicon vendors and OEMs visiting Cambridge England, August 5-8 transforms the univeristy town into the world's center of innovation for one week. Cambridge in August attracts international leaders in…
Here are the online events we'll be attending in the coming weeks – join us!
17-18 March, Online
20-21 March, Online
23-25 March, Online