News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using gcc sanitisers to get a nasty bug fixed

February 18, 2020 by Andrej Shadura  |   Blog

When a bug surprises you when doing Apertis packaging of a typical vendor code signing tool, it's time to debug it using the compiler's built-in tools.

Using gcc sanitisers to get a nasty bug fixed

FOSDEM 2020 - Recorded presentations (videos)

February 05, 2020 by Mark Filion  |   Blog

From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track.

FOSDEM 2020 - Recorded presentations (videos)

Opening up Mali T720

December 20, 2019 by Alyssa Rosenzweig  |   Blog

If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!

Opening up Mali T720

New graphing tool for PipeWire debugging

December 09, 2019 by Julian Bouzas  |   Blog

PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.

New graphing tool for PipeWire debugging

Building GStreamer on Windows

November 26, 2019 by Aaron Boxer  |   Blog

With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.

Building GStreamer on Windows

Zink: Fall Update

October 24, 2019 by Erik Faye-Lund  |   Blog

I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.

Zink: Fall Update

Adding stateless support to vicodec

October 09, 2019 by Dafna Hirschfeld  |   Blog

Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.

Adding stateless support to vicodec

Why HDCP support in Weston is a good thing

October 03, 2019 by Pekka Paalanen  |   Blog

What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.

Why HDCP support in Weston is a good thing

Virglrenderer and the state of virtualized virtual worlds

August 28, 2019 by Gert Wollny  |   Blog

With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.

Virglrenderer and the state of virtualized virtual worlds

Panfrost & Wayland on a Rockchip board

August 06, 2019 by Rohan Garg  |   Blog

Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.

Panfrost & Wayland on a Rockchip board

What's new in OpenXR 1.0 & Monado?

August 02, 2019 by Ryan Pavlik  |   Blog

As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.

What's new in OpenXR 1.0 & Monado?

Zink: Summer Update & SIGGRAPH 2019

July 25, 2019 by Erik Faye-Lund  |   Blog

There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!

Zink: Summer Update & SIGGRAPH 2019

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Collabora & Debian 10 (Buster)

July 25, 2019 by Andrej Shadura  |   News & Events

With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!

Collabora & Debian 10 (Buster)

Linux Kernel 5.2

July 17, 2019 by Gabriel Krisman Bertazi  |   News & Events

With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.

Linux Kernel 5.2

Welcoming the newest Collaborans!

June 21, 2019 by Jassie Badion  |   News & Events

For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!

Welcoming the newest Collaborans!

Google Summer of Code 2019

May 30, 2019 by Mark Filion  |   News & Events

A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.

Google Summer of Code 2019

Linux Kernel 5.1

May 09, 2019 by André Almeida  |   News & Events

Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.

Linux Kernel 5.1

Collabora & GStreamer 1.16

May 06, 2019 by Aaron Boxer  |   News & Events

After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.

Collabora & GStreamer 1.16

GStreamer support for the RIST Specification

April 09, 2019 by Nicolas Dufresne  |   News & Events

Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.

GStreamer support for the RIST Specification

Linaro Connect meets Panfrost

March 29, 2019 by Mark Filion  |   News & Events

Next week, Collaborans will be in Bangkok, Thailand, to participate in the 25th edition of Linaro Connect, a gathering of the world's leading open source engineers working on Arm. Tomeu Vizoso and Gustavo Padovan will be in attendance to present Panfrost.

Linaro Connect meets Panfrost

Introducing: Monado

March 18, 2019 by Jakob Bornecrantz  |   News & Events

Following the release of the OpenXR 0.90 Provisional Specification by The Khronos Group, Collabora is proud to announce Monado, an open source implementation of the newly released OpenXR spec.

Introducing: Monado

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Linaro Virtual Connect

8-10 September, Online

XDC 2021

15-17 September, Online

Linux Plumbers Conference

20-24 September, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.