News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Adding bootloader support for USB 2.0 Host for Radxa ROCK 5B RK3588

April 27, 2023 by Eugen Hristev  |   Blog

The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!

Adding bootloader support for USB 2.0 Host for Radxa ROCK 5B RK3588

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April 25, 2023 by Muhammad Usama Anjum  |   News & Events

Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April brings tech events aplenty

April 20, 2023 by Kara Bembridge  |   News & Events

Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!

April brings tech events aplenty

Meson & VSCode: Develop your project in a modern IDE

April 18, 2023 by Xavier Claessens  |   Blog

Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!

Meson & VSCode: Develop your project in a modern IDE

Carlafox: Towards reliable open-source 3D perception

April 05, 2023 by Vineet Suryan  |   Blog

Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to automatically generate an error-free synthetic dataset for 3D perception.

Carlafox: Towards reliable open-source 3D perception

Moving forward with more hands on deck

March 27, 2023 by Kara Bembridge  |   News & Events

It’s no secret that Tech has faced some setbacks lately, namely on the headcount front. Despite these uncertainties, Collabora has had the privilege of increasing our roster with new teammates.

Moving forward with more hands on deck

Monado accepted for XROS 2023!

March 14, 2023 by Frédéric Plourde  |   News & Events

We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program.

Monado accepted for XROS 2023!

Showcasing the STM32MP1 at Embedded World

March 13, 2023 by Mark Filion  |   News & Events

As a recent new member of STMicroelectronics' Partner Program, we're excited to be showcasing the STM32MP1 at Embedded World this week, our first demo featuring the STM32 platform.

Showcasing the STM32MP1 at Embedded World

Implementing Vulkan extensions for NVK

March 10, 2023 by Rebecca McKeever  |   Blog

Since joining the graphics team at Collabora as a Software Engineering Intern last November, I have implemented several Vulkan API extensions for NVK, an open-source Vulkan driver for NVIDIA hardware in Mesa.

Implementing Vulkan extensions for NVK

Connecting at Embedded World 2023

March 09, 2023 by Kara Bembridge  |   News & Events

Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase

Connecting at Embedded World 2023

Oxidizing bmap-tools: rewriting a Python project in Rust

March 03, 2023 by Rafael Garcia Ruiz  |   Blog

Rewriting bmaptool in Rust to remove Python dependencies, create statically linked binary, and allow the bmap sparse file format to be used in other Rust projects.

Oxidizing bmap-tools: rewriting a Python project in Rust

Monado's "Mercury" hand tracking now ready for use!

February 24, 2023 by Moses Turner  |   News & Events

Work on this new tracking method started around January 2022. Now, after a little over a year of development, Monado's "Mercury" hand tracking is finally ready for the public to use!

Monado's "Mercury" hand tracking now ready for use!

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Wine on Wayland 2022 update: more games, more apps, more fun!

December 12, 2022 by Alexandros Frantzis  |   News & Events

The focus in 2022 was on maturing the Wayland driver and keeping up to date with the Wine upstream internal changes, which involved updating it for the latest internal driver APIs, and making preparations to support WoW64.

Wine on Wayland 2022 update: more games, more apps, more fun!

KernelCI now testing Linux Rust code

December 06, 2022 by Adrian Ratiu  |   News & Events

After waiting in the Linux-next integration tree for about 18 months, the basic Rust infrastructure finally landed in the mainline Linux kernel with the imminent release of v6.1.

KernelCI now testing Linux Rust code

Shifting to open gears for the Automotive Linux Summit

December 01, 2022 by Kara Bembridge  |   News & Events

Coming up next week at the Automotive Linux Summit in Yokohama and virtually, Marius Vlad and Daniel Stone will present the latest on the AGL Wayland compositor, and the current state of graphics virtualization upstream.

Shifting to open gears for the Automotive Linux Summit

Seizing knowledge at Capitole du Libre

November 16, 2022 by Kara Bembridge  |   News & Events

Clear your schedules, this weekend's Capitole du Libre is calling your name for all things open source! Gathering in the "Pink City" of Toulouse, participants are welcome to attend with free admission from November 19 to 20 at the INP-ENSEEIHT.

Seizing knowledge at Capitole du Libre

Fully charged for electronica 2022

November 10, 2022 by Kara Bembridge  |   News & Events

Making our grand debut, Collabora will be attending electronica in Munich for the first time! Diving into the world of electronics alongside the leading examples of the industry, we're excited to partake on all fronts.

Fully charged for electronica 2022

Kernel 6.0: Start of a new series and dawn of Rust

October 14, 2022 by Shreeya Patel  |   News & Events

Collabora's contributions include mainlining the HEVC uAPI, adding VirtIO documentation, upstreaming MediaTek smartphones, and adding support for two new Chromebooks and for the Mali-G57 GPU in the Panfrost kernel driver.

Kernel 6.0: Start of a new series and dawn of Rust

HEVC uAPI mainlined

October 06, 2022 by Benjamin Gaignard  |   News & Events

The release of Linux 6.0 earlier this week brought a significant milestone: the H.265/HEVC user-space API was mainlined, the result of more than two years of efforts by our engineering team.

HEVC uAPI mainlined

Introducing NVK

October 04, 2022 by Faith Ekstrand  |   News & Events

Say hello to a brand new, open-source Vulkan driver for NVIDIA hardware in Mesa, written almost entirely from scratch using the new official headers from NVIDIA.

Introducing NVK

Weston 11.0: what's new, what's next

September 29, 2022 by Marius Vlad  |   News & Events

Announced earlier this week, Weston 11.0 brings a number of highlights including optimizations in the DRM-backend, color management infrastructure code and multiple RDP improvements.

Weston 11.0: what's new, what's next

Three conferences for the price of none!

September 29, 2022 by Kara Bembridge  |   News & Events

This year's X. Org Developer's Conference (XDC) is teaming up with WineConf and FOSS XR in Minneapolis at the University of St. Thomas' Opus Hall for a jam-packed three day event.

Three conferences for the price of none!

A team that grows together, builds together

September 27, 2022 by Kara Bembridge  |   News & Events

Adding a variety of expertise from across the globe, the departments of Core, Multimedia, Kernel, XR, People Operations, and DevOps now have more hands on deck. Discover a snapshot of our newest teammates!

A team that grows together, builds together

A busy, open source week in Dublin!

September 12, 2022 by Mark Filion  |   News & Events

Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!

A busy, open source week in Dublin!

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.