News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Pressing play on GStreamer Conference 2023

September 21, 2023 by Kara Bembridge  |   News & Events

Sunny Spain will have multimedia developers on speed dial next week for the 11th edition of the GStreamer Conference, taking place at the Palexco Convention Centre in A Coruña from September 25 to 26.

Pressing play on GStreamer Conference 2023

Perfecting Open Source Recipes in Paris

September 19, 2023 by Kara Bembridge  |   News & Events

The world-renowned culinary scene in The City of Light will be getting a pack of different types of chefs next week for Kernel Recipes and Embedded Recipes. Kernel Recipes kicks off on September 25, then Embedded Recipes from September 28 to 29.

Perfecting Open Source Recipes in Paris

WhisperSpeech: Exploring new horizons in text-to-speech tech

September 13, 2023 by Jakub Piotr Clapa  |   Blog

Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.

WhisperSpeech: Exploring new horizons in text-to-speech tech

Empowering Open Source at IBC 2023

September 11, 2023 by Kara Bembridge  |   News & Events

Collabora is headed to Amsterdam! This year, we will be showcasing some of our recent work on the DAB protocol, as well as the software integration of LCEVC, MPEG's novel enhancement codec, into the GStreamer multimedia framework.

Empowering Open Source at IBC 2023

Monado SLAM datasets now available

September 11, 2023 by Mateo de Mayo  |   News & Events

The Monado SLAM datasets (MSD) are egocentric visual-inertial SLAM datasets recorded to improve the Basalt-based inside-out tracking component of the Monado project.

Monado SLAM datasets now available

Video codecs: Adding AV1 stateless video decoder support to Linux

September 07, 2023 by Benjamin Gaignard  |   News & Events

The latest mainline Linux kernel (v6.5) includes 22 patches that enable support for the AV1 uAPI and for two stateless video decoders: one for the Rockchip RK3588 and one for MT8195, a MediaTek SoC.

Video codecs: Adding AV1 stateless video decoder support to Linux

Linux kernel 6.5: USB4v2 and Wifi7 have arrived

August 30, 2023 by Adrian Larumbe  |   News & Events

The 6.5 release is here and it comes with many changes. As is often the case, Collabora has been actively involved in the submission of patches, mostly in the task of hardware enablement for Mediatek and Rockchip SoCs.

Linux kernel 6.5: USB4v2 and Wifi7 have arrived

Ready to All Systems Go!

August 23, 2023 by Kara Bembridge  |   News & Events

Set in the captivating city of Berlin, All Systems Go! is ready to explore foundational user-space Linux technologies after a 4-year hiatus.

Ready to All Systems Go!

Bridging IIO and Input in Linux

August 21, 2023 by Eugen Hristev  |   Blog

In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.

Bridging IIO and Input in Linux

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

August 10, 2023 by Paweł Wieczorek  |   Blog

Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

Persian Rug - It really ties the Rust room together

August 09, 2023 by Edmund Smith  |   Blog

Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.

Persian Rug - It really ties the Rust room together

NVK Has landed!

August 04, 2023 by Faith Ekstrand  |   News & Events

As of today, NVK, the new Vulkan driver for Nvidia GPUs, has landed in the main Mesa branch and will be included as an experimental driver in the 23.3 release of Mesa.

NVK Has landed!

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Kernel 5.14: 30 years in the making and still improving

September 07, 2021 by Nícolas F. R. A. Prado  |   News & Events

With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.

Kernel 5.14: 30 years in the making and still improving

Linaro Virtual Connect - Fall 2021

September 01, 2021 by Mark Filion  |   News & Events

September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!

Linaro Virtual Connect - Fall 2021

Reverse-engineering the Mali G78

July 20, 2021 by Alyssa Rosenzweig  |   News & Events

After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.

Reverse-engineering the Mali G78

Kernel 5.13: Growing team and KernelCI hackfest

July 08, 2021 by Gabriel Krisman Bertazi  |   News & Events

Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.

Kernel 5.13: Growing team and KernelCI hackfest

A very successful first KernelCI hackfest

June 21, 2021 by Shreeya Patel  |   News & Events

Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.

A very successful first KernelCI hackfest

Growing for the road ahead

June 21, 2021 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!

Growing for the road ahead

Wine on Wayland meets Vulkan, multi-monitor support & more

June 07, 2021 by Alexandros Frantzis  |   News & Events

We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.

Wine on Wayland meets Vulkan, multi-monitor support & more

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

AGL All Member Meeting

July 17-18, Berlin, Germany

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.