January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
February 18, 2019 by Andrzej Pietrasiewicz | Blog
A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.
February 15, 2019 by Mark Filion | Blog
From the latest on Open Source projects Zink (OpenGL on Vulkan) and VirGL (virtual 3D GPU for QEMU), to a state of the union on GStreamer embedded, and a look at how the KernelCI project is getting a second breath, Collaborans presented in five devrooms.
January 07, 2019 by Tomeu Vizoso | Blog
Panfrost, a project that delivers an open source implementation of a driver for the newest versions of the Mali family of GPUs, now includes support for running Wayland compositors and zero-copy GPU-accelerated clients.
December 17, 2018 by Gustavo Padovan | Blog
Released a few months ago, the Google Pixel 3 is the first Android phone running with the mainline graphics stack. A feat that was deemed impossible 10 years ago is now a reality thanks to a lot of hard work from the entire community.
November 28, 2018 by Martyn Welch | Blog
In an ideal world, everyone would implicitly understand that it just makes good business sense to upstream some of the modifications made when creating your Linux powered devices. Unfortunately, this is a long way from being common knowledge.
November 23, 2018 by Alexandros Frantzis | Blog
How can we measure the comprehensiveness of a test suite? Code coverage is the standard metric used in the industry and makes intuitive sense. However, it can often present some difficulties for large scale surveys.
November 21, 2018 by Gabriel Krisman Bertazi | Blog
A real-world use case of eBPF tracing to understand file access patterns in the Linux kernel and optimize large applications.
November 06, 2018 by Xavier Claessens | Blog
Did you know you could register your own PC, or a spare laptop collecting dust in a drawer, to get instant CI going on GitLab? Not only will you get faster CI, but you'll also reduce the queue on the shared runner for others!
October 31, 2018 by Erik Faye-Lund | Blog
For the last month or so, I've been playing with a new project during my work at Collabora, and as I've already briefly talked about at XDC 2018, it's about time to talk about it to a wider audience.
October 18, 2018 by Alexandros Frantzis | Blog
For projects of any value and significance, having a comprehensive automated test suite is nowadays considered a standard software engineering practice. Why, then, don't we see more prominent FOSS projects employing this practice?
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
December 06, 2022 by Adrian Ratiu | News & Events
After waiting in the Linux-next integration tree for about 18 months, the basic Rust infrastructure finally landed in the mainline Linux kernel with the imminent release of v6.1.
December 01, 2022 by Kara Bembridge | News & Events
Coming up next week at the Automotive Linux Summit in Yokohama and virtually, Marius Vlad and Daniel Stone will present the latest on the AGL Wayland compositor, and the current state of graphics virtualization upstream.
November 16, 2022 by Kara Bembridge | News & Events
Clear your schedules, this weekend's Capitole du Libre is calling your name for all things open source! Gathering in the "Pink City" of Toulouse, participants are welcome to attend with free admission from November 19 to 20 at the INP-ENSEEIHT.
November 10, 2022 by Kara Bembridge | News & Events
Making our grand debut, Collabora will be attending electronica in Munich for the first time! Diving into the world of electronics alongside the leading examples of the industry, we're excited to partake on all fronts.
October 14, 2022 by Shreeya Patel | News & Events
Collabora's contributions include mainlining the HEVC uAPI, adding VirtIO documentation, upstreaming MediaTek smartphones, and adding support for two new Chromebooks and for the Mali-G57 GPU in the Panfrost kernel driver.
October 06, 2022 by Benjamin Gaignard | News & Events
The release of Linux 6.0 earlier this week brought a significant milestone: the H.265/HEVC user-space API was mainlined, the result of more than two years of efforts by our engineering team.
October 04, 2022 by Jason Ekstrand | News & Events
Say hello to a brand new, open-source Vulkan driver for NVIDIA hardware in Mesa, written almost entirely from scratch using the new official headers from NVIDIA.
September 29, 2022 by Marius Vlad | News & Events
Announced earlier this week, Weston 11.0 brings a number of highlights including optimizations in the DRM-backend, color management infrastructure code and multiple RDP improvements.
September 29, 2022 by Kara Bembridge | News & Events
This year's X. Org Developer's Conference (XDC) is teaming up with WineConf and FOSS XR in Minneapolis at the University of St. Thomas' Opus Hall for a jam-packed three day event.
September 27, 2022 by Kara Bembridge | News & Events
Adding a variety of expertise from across the globe, the departments of Core, Multimedia, Kernel, XR, People Operations, and DevOps now have more hands on deck. Discover a snapshot of our newest teammates!
September 12, 2022 by Mark Filion | News & Events
Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!
September 06, 2022 by Kara Bembridge | News & Events
Showcasing two new software demonstrations featuring machine learning, including backend video compression that runs on Panfrost, and a data quality assurance tool designed to integrate into the annotation pipeline.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português