June 07, 2016 by Mark Filion | News and Events
Collabora will be exhibiting at InfoComm 2016, the largest, most exciting event in the United States focused on the pro-AV industry, in Last Vegas on June 8-10, 2016.
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
April 15, 2016 by Andrew Shadura | Blog
How the use of Yocto and OpenEmbedded helps corporations migrate to free software.
April 11, 2016 by Mark Filion | News and Events
On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…
March 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.5 was released earlier this week, and once again Collabora engineers played a role in its development. In addition to their current projects, seven Collabora engineers contributed a total of 33 patches to the new Kernel.
February 16, 2016 by Pekka Paalanen | Blog
How is an uncompressed raster image laid out in computer memory? How is a pixel represented? What are stride and pitch and what do you need them for? How do you address a pixel in memory? How do you describe an image in memory? Pekka discusses the essential…
January 11, 2023 by Jakob Bornecrantz | Blog
It's with excitement and nervousness that I'm writing this post, sitting on a plane heading to Boston where I will attend the MIT Reality Hack as a mentor.
December 20, 2022 by Mateo de Mayo | Blog
The development of Monado's inside-out tracking solution keeps improving and more devices are now supported. Here's an overview of where things stand, as presented at the FOSS XR conference in October.
December 15, 2022 by Italo Nicola | Blog
Machine learning is increasingly seeing more applications and it's important to have FOSS options to accelerate such workloads. With that in mind, we began an effort earlier this year to get a TFLite model running on a VIM3 NPU using Etnaviv and OpenCL.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
September 12, 2022 by Mark Filion | News & Events
Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!
September 06, 2022 by Kara Bembridge | News & Events
Showcasing two new software demonstrations featuring machine learning, including backend video compression that runs on Panfrost, and a data quality assurance tool designed to integrate into the annotation pipeline.
August 30, 2022 by Frédéric Plourde | News & Events
Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.
August 16, 2022 by Kara Bembridge | News & Events
A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!
August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
Here are the events we'll be attending in the coming weeks – come say hello!
April 9-11, Nuremberg, Germany
April 9-11, Las Vegas, USA
April 13-17, Las Vegas, USA
April 16-18, Seattle, USA
April 22-26, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português