News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Collabora Contributions to Linux Kernel 4.9

December 14, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.9 was released this week and once more Collabora developers took part on the kernel development cycle. This time we contributed 36 patches by 11 different developers, our highest number of single contributors in a kernel release ever. Remember…

Collabora Contributions to Linux Kernel 4.9

GStreamer meets HotDoc

November 29, 2016 by Mark Filion  |   News and Events

Some exciting news today as GStreamer launches its redesigned documentation site, complete with dynamic navigation, search function and new tutorials. This new iteration is powered by HotDoc, a tool created by Collabora's Mathieu Duponchelle!

GStreamer meets HotDoc

A tale of cylinders and shadows

November 22, 2016 by Gustavo Noronha  |   Blog

Our ongoing work on improving WebKitGTK+ performance brought us to take a closer look as to why GTK+ was experiencing significant speed issues when used with Wayland and HiDPI screens, revealing the root cause to be within the lower level toolkit.

A tale of cylinders and shadows

How continuous integration can help you keep pace with the Linux kernel

November 08, 2016 by Tomeu Vizoso  |   Blog

Almost all of Collabora's customers use the Linux kernel on their products. Often they will use the exact code as delivered by the SBC vendors and we'll work with them in other parts of their software stack. But it's becoming increasingly common for our…

How continuous integration can help you keep pace with the Linux kernel

Collabora contributions to GStreamer 1.10 - Part 2

November 03, 2016 by Olivier Crête  |   Blog

In the first part of my review of Collabora's participation in GStreamer 1.10, I discussed the work done by Guillaume & Nicolas around leak tracing, acoustic echo cancellation, Wayland, V4L, etc. Today, I'll go over the contributions from the rest of…

Collabora contributions to GStreamer 1.10 - Part 2

Collabora contributions to GStreamer 1.10

November 02, 2016 by Olivier Crête  |   Blog

Yesterday, we celebrated the release of GStreamer 1.10, the culmination of 7 months of very hard work from the GStreamer community. Collabora's multimedia team is extremely proud of our contributions to this new major feature release.

Collabora contributions to GStreamer 1.10

Linux Plumbers Conference 2016

October 26, 2016 by Mark Filion  |   News and Events

Collabora is proud to be once again sponsoring the annual Linux Plumbers Conference, the developer conference that brings together the top developers working on the “plumbing” of Linux: kernel subsystems, core libraries, windowing systems, etc.

Linux Plumbers Conference 2016

Open Build Service in Debian - Part 2

October 25, 2016 by Héctor Orón Martínez  |   Blog

In the previous post, I gave an overview of the Open Build Service software architecture. In this second part, a tutorial on setting up a package build with OBS from Debian packages is presented.

Open Build Service in Debian - Part 2

Open Build Service in Debian - Part 1

October 24, 2016 by Héctor Orón Martínez  |   Blog

openSUSE distributions’ build system is based on a generic framework named Open Build Service (OBS), I have been using these tools in my work environment, and I have to say, as Debian developer, that it is a great tool. In this blog post I plan for you…

Open Build Service in Debian - Part 1

Mainline Explicit Fencing - Part 2

October 18, 2016 by Gustavo Padovan  |   Blog

In the first part we covered the main concepts behind Explicit Synchronization for the Linux Kernel. Now in the second part of the series we are going to look to the Android Sync Framework, the first (out-of-tree) Explicit Fencing implementation for the…

Mainline Explicit Fencing - Part 2

Making Viewer UIs for Pitivi

October 13, 2016 by Lubosz Sarnecki  |   Blog

Being someone who has already experimented with two transformation box approaches for Pitivi in the past, maintainers thought I might be the right person to do a modern one. Creating a user interface for a video transformation requires three things: the…

Making Viewer UIs for Pitivi

GStreamer Conference 2016

October 07, 2016 by Mark Filion  |   News and Events

Collabora is proud to be a Platinum Sponsor of this year's GStreamer Conference, taking place at the Betahaus in Berlin, Germany on 10-11 October 2016. Come say hello, or catch one of the four presentations given by Collaborans during the conference!

GStreamer Conference 2016

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

Tracing user space and OS interactions

April 10, 2017 by Gabriel Krisman Bertazi  |   Blog

Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.

Tracing user space and OS interactions

Ubuntu rejoins the GNOME fold

April 05, 2017 by Daniel Stone  |   Blog

Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.

Ubuntu rejoins the GNOME fold

Android: Enabling mainline graphics

March 29, 2017 by Robert Foss  |   Blog

Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.

Android: Enabling mainline graphics

Linux block I/O tracing

March 28, 2017 by Gabriel Krisman Bertazi  |   Blog

Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.

Linux block I/O tracing

GTK+ Hackfest 2017: D-Bus communication with containers

March 24, 2017 by Simon McVittie  |   Blog

At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.

GTK+ Hackfest 2017: D-Bus communication with containers

Performance analysis in Linux

March 21, 2017 by Gabriel Krisman Bertazi  |   Blog

Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.

Performance analysis in Linux

Kernel debugging with QEMU: An overview of tools available

March 13, 2017 by Frédéric Dalleau  |   Blog

Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.

Kernel debugging with QEMU: An overview of tools available

Quick hack: Removing the Chromebook Write-Protect screw

March 08, 2017 by Robert Foss  |   Blog

Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.

Quick hack: Removing the Chromebook Write-Protect screw

A helping Arm for Panfrost

July 20, 2023 by Daniel Stone  |   News & Events

Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.

A helping Arm for Panfrost

A weekend for developers

July 13, 2023 by Kara Bembridge  |   News & Events

With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.

A weekend for developers

Zink brings conformant OpenGL on Imagination GPUs

July 06, 2023 by Erik Faye-Lund  |   News & Events

Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.

Zink brings conformant OpenGL on Imagination GPUs

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

July 05, 2023 by Rogerio Alves Cardoso  |   News & Events

Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

NVK update: Enabling new extensions, conformance status & more

June 26, 2023 by Faith Ekstrand  |   News & Events

Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.

NVK update: Enabling new extensions, conformance status & more

Ready to embark for Embedded Open Source Summit

June 22, 2023 by Kara Bembridge  |   News & Events

Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.

Ready to embark for Embedded Open Source Summit

Making new strides at AWE

May 29, 2023 by Kara Bembridge  |   News & Events

Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.

Making new strides at AWE

Weston 12.0: Highlights and changes for Wayland's reference compositor

May 25, 2023 by Marius Vlad  |   News & Events

Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.

Weston 12.0: Highlights and changes for Wayland's reference compositor

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April 25, 2023 by Muhammad Usama Anjum  |   News & Events

Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April brings tech events aplenty

April 20, 2023 by Kara Bembridge  |   News & Events

Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!

April brings tech events aplenty

Moving forward with more hands on deck

March 27, 2023 by Kara Bembridge  |   News & Events

It’s no secret that Tech has faced some setbacks lately, namely on the headcount front. Despite these uncertainties, Collabora has had the privilege of increasing our roster with new teammates.

Moving forward with more hands on deck

Monado accepted for XROS 2023!

March 14, 2023 by Frédéric Plourde  |   News & Events

We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program.

Monado accepted for XROS 2023!

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Electronica

November 12-15, Munich, Germany

NeurIPS

December 10-15, Vancouver, Canada

FOSDEM

February 1-2, Brussels, Belgium

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.