June 13, 2017 by Helen Koike | Blog
The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!
June 05, 2017 by Robert Foss | Blog
GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
May 01, 2017 by Helen Fornazier | News & Events
Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
August 28, 2019 by Gert Wollny | Blog
With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.
August 06, 2019 by Rohan Garg | Blog
Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.
August 02, 2019 by Ryan Pavlik | Blog
As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.
July 25, 2019 by Erik Faye-Lund | Blog
There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!
July 18, 2019 by Nicolas Dufresne | Blog
A little over a month and a half ago, Collaborans including Aaron Boxer, George Kiagiadakis, Guillaume Desmottes, Stéphane Cerveau and myself took part in the GStreamer Spring Hackfest in Oslo. This year, the hackfest was kindly hosted by Pexip.
June 26, 2019 by Alyssa Rosenzweig | Blog
In my last Panfrost blog post, I announced my internship goal: improve Panfrost to run GNOME3. GNOME is a popular Linux desktop making heavy use of OpenGL; to use GNOME with only free and open source software on a machine with Mali graphics, Panfrost…
June 24, 2019 by Andrzej Pietrasiewicz | Blog
Dummy_hcd which consists of a software-emulated host controller and a UDC chip. In other words, this means you can play with USB gadgets even if you don't have the appropriate hardware, because your PC can act as both a USB host and a USB device.
June 18, 2019 by Frédéric Danis | Blog
Both the Le Potato and OrangePi Zero Plus2 boards are already supported by Armbian. But how do you get a minimal Debian upstream image with only the packages you want? Debos is the perfect tool to do this.
June 05, 2019 by Alyssa Rosenzweig | Blog
Years ago, I joined the open-source community with a passion and a mission: to enable equal access to high-quality computing via open-source software. With this mission, I co-founded Panfrost, aiming to create an open-source driver for the Mali GPU.
May 23, 2019 by Ezequiel Garcia | Blog
With virtme, you can run a custom built kernel on top of our running root filesystem. In this post, we explore another example of virtme in action, and see how to test Video4Linux2 drivers on bleeding edge GStreamer builds.
May 16, 2019 by Andrzej Pietrasiewicz | Blog
Introducing cmtp-responder - a permissively licensed Media Transfer Protocol (MTP) responder implementation which allows embedded devices to provide MTP services and supports a core set of MTP operations.
May 14, 2019 by Adrian Ratiu | Blog
Up until now, talking in-depth about userspace tracing was deliberately avoided because it merits special treatment, hence this part devoted to it. We'll now look at the why of it, and we'll examine eBPF user tracing in two categories: static and dynamic.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
May 04, 2021 by Ariel D'Alessandro | News & Events
With their latest contributions all around the kernel, notably to the Video4Linux APIs and hardware enablement, Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
March 25, 2021 by Boris Brezillon | News & Events
The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.
March 22, 2021 by Mark Filion | News & Events
Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.
Here are the events we'll be attending in the coming weeks – come say hello!
March 11-13, Nuremberg, Germany
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português