News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

NVMe: Officially faster for emulated controllers!

June 13, 2017 by Helen Koike  |   Blog

The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!

NVMe: Officially faster for emulated controllers!

Android: NXP i.MX6 Buffer Modifier Support

June 05, 2017 by Robert Foss  |   Blog

GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.

Android: NXP i.MX6 Buffer Modifier Support

Outreachy 2017

June 02, 2017 by Mark Filion  |   News & Events

Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.

Outreachy 2017

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

Connecting at Embedded World 2023

March 09, 2023 by Kara Bembridge  |   News & Events

Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase

Connecting at Embedded World 2023

Monado's "Mercury" hand tracking now ready for use!

February 24, 2023 by Moses Turner  |   News & Events

Work on this new tracking method started around January 2022. Now, after a little over a year of development, Monado's "Mercury" hand tracking is finally ready for the public to use!

Monado's "Mercury" hand tracking now ready for use!

PanCSF: A new DRM driver for Mali CSF-based GPUs

February 23, 2023 by Boris Brezillon  |   News & Events

A look into the new job-scheduling model with Mali GPUs, their support in the new PanCSF DRM driver, and what it means as the rest of the ecosystem also moves to firmware-assisted scheduling.

PanCSF: A new DRM driver for Mali CSF-based GPUs

Kernel 6.2: More Rust support for drivers

February 21, 2023 by Daniel Almeida  |   News & Events

With more SoC support, a new V4L2 driver and a new dma-buf locking convention among its contributions, Collabora was one of the most active employers for this latest kernel development cycle.

Kernel 6.2: More Rust support for drivers

GStreamer 1.22: Bigger and better!

February 08, 2023 by Olivier Crête  |   News & Events

Improved support for hardware accelerated video decoders, new GTK+ integration for Wayland rendering, and further Meson enhancements to make GStreamer shine on embedded, Collabora's multimedia team made a number of key contributions for this latest release.

GStreamer 1.22: Bigger and better!

FOSDEM back in full force for 2023

January 20, 2023 by Kara Bembridge  |   News & Events

After two years of hosting the event virtually, Brussels will once again welcome attendees on February 4 & 5 on the old stomping grounds of the ULB Solbosch Campus. Collabora will be presenting 8 different talks, in 7 devrooms as well as on the main track!

FOSDEM back in full force for 2023

Always growing, always evolving

December 29, 2022 by Kara Bembridge  |   News & Events

With only a few months passing since our last new joiner update, it should come as no surprise that the Collabora crowd has expanded yet again. Our flexible disposition affords us an exceptional bunch to onboard when opportunity knocks.

Always growing, always evolving

Faith Ekstrand is a 2022 Khronie Award recipient!

December 19, 2022 by Kara Bembridge  |   News & Events

Contributing to the Vulkan Working Group since 2015, Faith has continues to make a significant impact. Her expertise and diligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight.

Faith Ekstrand is a 2022 Khronie Award recipient!

Kernel 6.1: Multi-generational improvements

December 13, 2022 by AngeloGioacchino Del Regno  |   News & Events

Collabora's contributions include ongoing upstreaming of the RockChip RK3588 and MediaTek Helio X10 (MT6795) SoCs, numerous bug fixes and improvements for Cedrus and Hantro IPs, and memory shrinker support for the VirtIO-GPU driver.

Kernel 6.1: Multi-generational improvements

Wine on Wayland 2022 update: more games, more apps, more fun!

December 12, 2022 by Alexandros Frantzis  |   News & Events

The focus in 2022 was on maturing the Wayland driver and keeping up to date with the Wine upstream internal changes, which involved updating it for the latest internal driver APIs, and making preparations to support WoW64.

Wine on Wayland 2022 update: more games, more apps, more fun!

KernelCI now testing Linux Rust code

December 06, 2022 by Adrian Ratiu  |   News & Events

After waiting in the Linux-next integration tree for about 18 months, the basic Rust infrastructure finally landed in the mainline Linux kernel with the imminent release of v6.1.

KernelCI now testing Linux Rust code

Shifting to open gears for the Automotive Linux Summit

December 01, 2022 by Kara Bembridge  |   News & Events

Coming up next week at the Automotive Linux Summit in Yokohama and virtually, Marius Vlad and Daniel Stone will present the latest on the AGL Wayland compositor, and the current state of graphics virtualization upstream.

Shifting to open gears for the Automotive Linux Summit

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

GStreamer

October 7-10, Montreal, Quebec

XDC

October 9-11, Montreal, Quebec

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.