News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Kernel 5.16: A new release for a new year

January 20, 2022 by André Almeida  |   News & Events

With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.

Kernel 5.16: A new release for a new year

First up in 2022: linux.conf.au!

January 11, 2022 by Mark Filion  |   News & Events

The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.

First up in 2022: linux.conf.au!

Wine on Wayland year-end update: improved functionality & stability

December 22, 2021 by Alexandros Frantzis  |   Blog

It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.

Wine on Wayland year-end update: improved functionality & stability

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Venus on QEMU: Enabling the new virtual Vulkan driver

November 26, 2021 by Antonio Caggiano  |   Blog

A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.

Venus on QEMU: Enabling the new virtual Vulkan driver

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Run your own CI pipeline with GStreamer's new monorepo

October 26, 2021 by Xavier Claessens  |   Blog

Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.

Run your own CI pipeline with GStreamer's new monorepo

Improving test coverage for cameras in KernelCI

October 08, 2021 by Nícolas F. R. A. Prado  |   Blog

Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.

Improving test coverage for cameras in KernelCI

A tale of two toolchains and glibc

September 30, 2021 by Adrian Ratiu  |   Blog

With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.

A tale of two toolchains and glibc

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Jason Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Jason Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Jason Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Improving the reliability of file system monitoring tools

March 14, 2022 by Gabriel Krisman Bertazi  |   Blog

Every file system used in production has tools to try to recover from system crashes. To provide a better infrastructure for those tools, our kernel team developed FAN_FS_ERROR, a new fanotify event which monitors error notifications.

Improving the reliability of file system monitoring tools

PipeWire: A year in review & a look ahead

March 08, 2022 by George Kiagiadakis  |   Blog

The PipeWire project made major strides over the past few years, bringing shiny new features, and paving the way for new possibilities in the Linux multimedia scene. A look what was accomplished in 2021, and what lies ahead for 2022.

PipeWire: A year in review & a look ahead

Event: GStreamer Conference 2014

September 29, 2014 by Guy Lunardi  |   News and Events

Düsseldorf, Germany October 16-17, 2014: the GStreamer Conference is a conference for developers, decision-makers, community members, industry partners, and anyone else interested in the GStreamer multimedia framework or Open Source and cross-platform…

Event: GStreamer Conference 2014

Event: IBC 2014

August 14, 2014 by Guy Lunardi  |   News and Events

Amsterdam, The Netherlands September 12-16, 2014: the essential global meeting place for everyone engaged in creating, managing and delivering the future of electronic media and entertainment technology and content. Collabora booth #8.B38c

Event: IBC 2014

Event: SIGGRAPH 2014

August 11, 2014 by Guy Lunardi  |   News and Events

Vancouver, Canada August 12-14, 2014: SIGGRAPH, visit ARM at Booth #933 in the Mobile Pavilion to meet with Collabora. SIGGRAPH attracts 20,000 international attendees from across the globe and many creative and technical disciplines. It is the only…

Event: SIGGRAPH 2014

News: In Cambridge, England 2014

August 05, 2014 by Guy Lunardi  |   News and Events

Cambridge, England August 5-8, 2014: With so many silicon vendors and OEMs visiting Cambridge England, August 5-8 transforms the univeristy town into the world's center of innovation for one week. Cambridge in August attracts international leaders in…

News: In Cambridge, England 2014

News: Raspberry Pi Today Interview

July 17, 2014 by Guy Lunardi  |   News and Events

Raspberry Pi Today interviews Collabora's Daniel Stone about Collabora and the Raspberry Pi Foundation's work on Wayland and WebKit.

News: Raspberry Pi Today Interview

Event: Automotive Linux Summit

June 19, 2014 by Guy Lunardi  |   News and Events

Tokyo, Japan July 1-2, 2014: The Automotive Linux Summit will bring together the most innovative minds from automotive expertise and open-source excellence.

Event: Automotive Linux Summit

News: New Collabora website launches

June 19, 2014 by Guy Lunardi  |   News and Events

Collabora introduces our new brand and logo

News: New Collabora website launches

Press release: Collabora Brings Wayland...

May 23, 2013 by Guy Lunardi  |   News and Events

Press release: Collabora Brings Wayland...

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Akademy

October 1-7, Barcelona, Spain

XDC + WineConf + FOSS XR

October 4-6, Minneapolis, MN, USA

Tracing Summit

October 11-13, London, UK

Khronos F2F

August 8-11, Phoenix, AZ, USA

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.