June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
April 06, 2022 by Frédéric Plourde | News & Events
Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
November 08, 2017 by Mark Filion | News & Events
On November 8, we'll be in Düsseldorf, Germany, to take part & exhibit at the 1st edition of the Renesas European R-Car Consortium Forum, a one-day event aimed at bringing together OEMs and Tier1s to discuss the future of car mobility.
October 20, 2017 by Mark Filion | News & Events
Following a weekend at the GStreamer Conference, Collabora will be continuing its week-long stay in Prague by sponsoring, exhibiting and speaking at Embedded Linux Conference Europe 2017.
October 19, 2017 by Mark Filion | News & Events
We're thrilled to be once again a platinum sponsor of the annual GStreamer Conference, taking place this weekend (October 21 & 22) at Node5 in Prague, Czech Republic. Come say hello, or catch one of the five presentations given by Collaborans!
September 25, 2017 by Mark Filion | News & Events
This week, Collabora is heading to the city of lights, Paris, to sponsor and attend the very first (and sold-out!) edition of Embedded Recipes, as well as the 6th edition of Kernel Recipes!
September 20, 2017 by Mark Filion | News & Events
The 2017 X.Org Developer's Conference kicks off today in Mountain View, California, and along with Collaborans attending & presenting, we're delighted to announce the first ever Collabora XDC Happy Hour!
September 11, 2017 by Mark Filion | News & Events
Collaborans will be giving five talks during this year's edition, which starts today in Los Angeles!
September 06, 2017 by Sebastian Reichel | News & Events
Linux Kernel 4.13 is out, with 12 Collabora developers having contributed, pairing up with 4.12 as another kernel release with our highest number of Collabora developers!
August 04, 2017 by Mark Filion | News and Events
Collabora is proud to once again be a Gold Sponsor of this year's DebConf, the annual Debian conference for developers! This year's week-long conference takes place from August 6 to 12 at Collège de Maisonneuve in beautiful Montréal, where one of our…
July 27, 2017 by Mark Filion | News and Events
Over the next few days, Collaborans will be getting back on the road and attending two events, one in Manchester and one in Los Angeles. We're also very pleased to be sponsoring one of these events!
July 04, 2017 by Martyn Welch | News & Events
Linux Kernel 4.12 is out, with 12 Collabora developers having contributed, a new record number of developers contributing to a single kernel release for Collabora!
June 27, 2017 by Mark Filion | News & Events
Our worldwide team of Open Source engineers and developers continues to grow with new additions in Core, Graphics & Web! Welcome Denis Pynkin, Alexandros Frantzis and Santosh Mahto!
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
Here are the events we'll be attending in the coming weeks – come say hello!
January 31 - February 2, Helsinki, Finland
February 4-5, Brussels, Belgium
February 13-15, Seattle, Washington
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português