News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Kernel 5.17: Solid & steady

March 31, 2022 by Sebastian Fricke  |   News & Events

While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.

Kernel 5.17: Solid & steady

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

WirePlumber, the PipeWire session manager

May 07, 2020 by George Kiagiadakis  |   Blog

An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.

WirePlumber, the PipeWire session manager

Reducing the size of a Rust GStreamer plugin

April 28, 2020 by Guillaume Desmottes  |   Blog

With Rust gaining traction among the GStreamer community as an alternative to C to write applications and plugins, we began wondering, could the size of such Rust plugins be a problem for embedded systems?

Reducing the size of a Rust GStreamer plugin

From Bifrost to Panfrost - deep dive into the first render

April 23, 2020 by Alyssa Rosenzweig  |   Blog

The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!

From Bifrost to Panfrost - deep dive into the first render

Alyssa Rosenzweig receives Google Open Source Peer Bonus

April 20, 2020 by Mark Filion  |   Blog

Google Open Source has announced their 2020 first quarter Google Open Source Peer Bonus winners, and Alyssa Rosenzweig, Software Engineer at Collabora, is among the recipients!

Alyssa Rosenzweig receives Google Open Source Peer Bonus

Using syzkaller, part 2: Detecting programming bugs in the Linux kernel

April 17, 2020 by Andre Almeida  |   Blog

In my previous blog post, we discussed the importance of testing, what is fuzzing, and how the syzkaller fuzzes the kernel in order to find bugs. Now, let’s install the tool and starting using it to improve our code base.

Using syzkaller, part 2: Detecting programming bugs in the Linux kernel

Open Source software releases: Q1 2020 recap

April 14, 2020 by Mark Filion  |   Blog

Open Source software development thrives on remote collaboration, and continues to do so in 2020, with multiple projects announcing releases in the first quarter.

Open Source software releases: Q1 2020 recap

Clean, reliable setup for dependency installation

April 10, 2020 by Pekka Paalanen  |   Blog

When you work on a piece of software, you usually want to be able to build and test it manually on your local system, but without compromising your system or destabilizing the distribution provided software.

Clean, reliable setup for dependency installation

Adding mainline Arm Frame Buffer Compression support for Rockchip

April 08, 2020 by Andrzej Pietrasiewicz  |   Blog

Rockchip SoCs, notably the RK3399, are popular in devices such as Chromebooks and single-board computers. Indeed, they bring some interesting features, one of them being the Arm Frame Buffer Compression (AFBC).

Adding mainline Arm Frame Buffer Compression support for Rockchip

Say hello to the newest Collaborans!

April 21, 2020 by Erica Ryoo  |   News & Events

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!

Say hello to the newest Collaborans!

Projects and progress in Linux kernel 5.6

March 31, 2020 by Helen Koike  |   News & Events

Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.

Projects and progress in Linux kernel 5.6

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

March 30, 2020 by Mark Filion  |   News & Events

This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

Introducing OpenCL and OpenGL on DirectX

March 24, 2020 by Erik Faye-Lund  |   News & Events

Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.

Introducing OpenCL and OpenGL on DirectX

Monado OpenXR runtime developer update

February 25, 2020 by Jakob Bornecrantz  |   News & Events

Ever since announcing the project at GDC 2019, we have been working on improving the full open source XR stack to a usable state. Today, we are very happy to tag version 0.1 of the Monado OpenXR runtime for Linux!

Monado OpenXR runtime developer update

Low latency streaming of security video feeds with SRT and GStreamer

February 12, 2020 by Jakub Adam  |   News & Events

With the advent of 5G networks, it's now possible to stream high quality video in real-time with a very low latency that wasn't possible with the past generations of mobile networks.

Low latency streaming of security video feeds with SRT and GStreamer

Linux Kernel 5.5

January 30, 2020 by Sebastian Reichel  |   News & Events

With the 5.5 kernel released earlier this week, here's a detailed look at Collabora’s contributions, including work to improve upstream support of peripherals used together with the i.MX 6 family of processors.

Linux Kernel 5.5

FOSDEM 2020

January 23, 2020 by Mark Filion  |   News & Events

In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans!

FOSDEM 2020

Meet the newest Collaborans!

January 16, 2020 by Erica Ryoo  |   News & Events

What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!

Meet the newest Collaborans!

Linux Kernel 5.4

December 02, 2019 by Enric Balletbò i Serra  |   News & Events

Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.

Linux Kernel 5.4

And the Collabora family keeps growing!

November 20, 2019 by Jassie Badion  |   News & Events

As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!

And the Collabora family keeps growing!

GStreamer & automated testing in Lyon

October 30, 2019 by Mark Filion  |   News & Events

Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.

GStreamer & automated testing in Lyon

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Kamaros F2F

January 31 - February 2, Helsinki, Finland

FOSDEM

February 4-5, Brussels, Belgium

OpenXR F2F

February 13-15, Seattle, Washington

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2023. All rights reserved. Privacy Notice. Sitemap.