April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 25, 2021 by Boris Brezillon | News & Events
The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 22, 2021 by Mark Filion | News & Events
Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 10, 2021 by Erik Faye-Lund | News & Events
One year ago, we announced a new partnership with Microsoft to build OpenGL mapping layers to DirectX 12. Today, we're excited to share that the we have passed the OpenGL 3.3 conformance tests, and have now upstreamed the D3D12 driver in Mesa 3D!
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 19, 2021 by Alexandros Frantzis | News & Events
Two months ago we announced a first proposal for a Wayland driver for Wine, the compatibility layer for Windows applications. Here's an update on this effort, which contains more details and instructions for building and running the Wayland driver.
February 17, 2021 by Ezequiel Garcia | News & Events
The first kernel release of 2021 brings a number of highlights contributed by Collaborans, including the new Syscall User Dispatch mechanism, and the destaging of both the H.264 stateless decoding interface and the Rockchip ISP driver.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 15, 2021 by Jakob Bornecrantz | News & Events
Monado, the OpenXR runtime for Linux, is now officially conformant! In recognition of this milestone, a first major release version of the OpenXR runtime for Linux is now available, bringing with it a SteamVR driver!
September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
March 09, 2018 by Mark Filion | News & Events
It's that time of the year again! The snow has melted, spring is right around the corner and the annual Embedded Linux Conference begins next week in Portland! If you are planning on attending, come say hello or catch one of our three presentations!
February 26, 2018 by Mark Filion | News & Events
This week, we're in Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-170!
January 29, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.15 was released yesterday, and it once again contained patches contributed by Collabora, including bigger patchsets like V4L2 Explicit Synchronization and UTF-8 case insensitive lookups for EXT4.
January 26, 2018 by Mark Filion | News & Events
Brussels, here we come! We're thrilled to be sponsoring this year's edition of FOSDEM, taking place in just over a week's time (February 3 & 4), at the Université Libre de Bruxelles. Come say hello, or catch one of a dozen talks given by Collaborans!
December 19, 2017 by Mark Filion | News & Events
For a second time this year, Collabora is proud to be sponsoring the latest round (Round 15) of Outreachy internships! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the December 2017 - March 2018 semester.
December 14, 2017 by Jassie Badion | News & Events
With less than 12 days to go before Christmas, here are 12 reasons, from 12 different people who became Collaborans this year, on why you should consider joining our team!
November 28, 2017 by Mark Filion | News & Events
We're delighted to be one of the 33 new members of the Secure Reliable Transport (SRT) Alliance, a group dedicated to accelerating interoperability of video streaming solutions and fostering collaboration with industry leaders to achieve lower latency…
November 16, 2017 by Mark Filion | News & Events
We're headed to France’s southern Occitanie region to attend and sponsor the 6th edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 13, 2017 by Gabriel Krisman Bertazi | News & Events
Linux Kernel 4.14 is out, and once again Collabora developers were very active, contributing nearly 200 patches, reviews & sign-offs combined during this development cycle!
November 10, 2017 by Mark Filion | News & Events
We're very excited to be sponsoring and speaking at the very first Linux Developer Conference Brazil, taking place on November 11 at the Instituto de Computação in Campinas!
November 08, 2017 by Mark Filion | News & Events
On November 8, we'll be in Düsseldorf, Germany, to take part & exhibit at the 1st edition of the Renesas European R-Car Consortium Forum, a one-day event aimed at bringing together OEMs and Tier1s to discuss the future of car mobility.
Here are the online events we'll be attending in the coming weeks – join us!
14-16 January, Online
5-6 February, Online