November 16, 2017 by Mark Filion | News & Events
We're headed to France’s southern Occitanie region to attend and sponsor the 6th edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 13, 2017 by Gabriel Krisman Bertazi | News & Events
Linux Kernel 4.14 is out, and once again Collabora developers were very active, contributing nearly 200 patches, reviews & sign-offs combined during this development cycle!
November 10, 2017 by Mark Filion | News & Events
We're very excited to be sponsoring and speaking at the very first Linux Developer Conference Brazil, taking place on November 11 at the Instituto de Computação in Campinas!
November 09, 2017 by Tomeu Vizoso | Blog
Running crosvm outside Chromium OS is quite easy, with the only complication being that minijail isn't widely packaged in distros. In these instructions, we hack around the issue with linker environment variables so we don't have to install it properly.
November 08, 2017 by Mark Filion | News & Events
On November 8, we'll be in Düsseldorf, Germany, to take part & exhibit at the 1st edition of the Renesas European R-Car Consortium Forum, a one-day event aimed at bringing together OEMs and Tier1s to discuss the future of car mobility.
November 06, 2017 by Thierry Escande | Blog
Kmemleak allows you to track possible memory leaks inside the Linux kernel. Basically, it tracks dynamically allocated memory blocks in the kernel and reports those without any reference left and that are therefore impossible to free.
October 20, 2017 by Mark Filion | News & Events
Following a weekend at the GStreamer Conference, Collabora will be continuing its week-long stay in Prague by sponsoring, exhibiting and speaking at Embedded Linux Conference Europe 2017.
October 19, 2017 by Mark Filion | News & Events
We're thrilled to be once again a platinum sponsor of the annual GStreamer Conference, taking place this weekend (October 21 & 22) at Node5 in Prague, Czech Republic. Come say hello, or catch one of the five presentations given by Collaborans!
October 17, 2017 by Gustavo Noronha | Blog
Earlier this month I had the pleasure of attending the Web Engines Hackfest, hosted by Igalia at their offices in A Coruña, and also sponsored by my employer, Collabora, Google and Mozilla. It has grown a lot and we had many new people this year.
October 06, 2017 by Gabriel Krisman Bertazi | Blog
In this post, I will show one more example of how easy it is to disrupt performance of a modern CPU, and also run a quick discussion on why performance matters - as well as present a few cases where it shouldn't matter.
September 25, 2017 by Mark Filion | News & Events
This week, Collabora is heading to the city of lights, Paris, to sponsor and attend the very first (and sold-out!) edition of Embedded Recipes, as well as the 6th edition of Kernel Recipes!
September 23, 2017 by Guy Lunardi | Blog
Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
April 11, 2016 by Mark Filion | News and Events
On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…
February 16, 2016 by Mark Filion | News and Events
Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.
December 17, 2015 by Mark Filion | News and Events
Amsterdam, The Netherlands - from 09/02/2016 to 12/02/2016: We'll be exhibiting at ISE 2016, the world's largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth 8-K321
October 28, 2015 by Mark Filion | News and Events
Berlin, Germany - from 05/11/2015 to 07/11/2015: The systemd.conf is the first conference devoted to the systemd project. It aims to bring developers, distribution packagers and devops professionals together to present, discuss, and work on that topics that will shape the future of the systemd project.
October 28, 2015 by Mark Filion | News and Events
A Coruña, Spain - from 07/12/2015 to 09/12/2015: The Web Engines Hackfest is a hacking oriented invitation-only event involving members from all parts of the Web Platform community, including those who work on Blink, WebKit, Gecko, and Servo.
October 13, 2015 by Guy Lunardi | News and Events
Seoul, South Korea - From 20/10/2015 to 23/10/2015: We will be exhibiting at the GENIVI Showcase during the All Member Meeting.
September 28, 2015 by Guy Lunardi | News and Events
Dublin, Ireland - from 08/10/2015 to 09/10/2015: The GStreamer Conference is a conference for anyone interested in the GStreamer multimedia framework or Open Source and cross-platform multimedia.
September 05, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands - from 10/09/2015 to 15/09/2015: we are thrilled to be joining ARM to demonstrate our latest technology showcases together at their booth at IBC 2015. Booth Hall 4.C61
August 14, 2015 by Guy Lunardi | News and Events
Seattle, USA - from 19/08/2015 to 21/08/2015: The Linux Plumbers Conference (LPC) is a developer conference for those working on the “plumbing” of Linux.
August 14, 2015 by Guy Lunardi | News and Events
Heidelberg, Germany - from 15/08/2015 to 22/08/2015: The 16th annual Debian developers meeting.
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português