February 21, 2018 by Mark Filion | Blog
From an introduction to Flatpak, to managing build infrastructure of a Debian derivative, to modern tools to debug GStreamer, Collaborans presented in six different developer rooms, as well as in the main track, at FOSDEM 2018.
February 20, 2018 by Justin Kim | Blog
Released earlier this month, the latest version of VLC, the free & open source multimedia player (which also uses the GStreamer framework) now contains SRT modules which had been in development in VLC's master branch.
February 16, 2018 by Olivier Crête | Blog
Transmitting low delay, high quality video over the Internet is hard. The trade-off is normally between video quality and transmission delay (or latency). Internet video has up to now been segregated into two segments: video streaming and video calls.
February 13, 2018 by Mark Filion | Blog
Following a great weekend in Brussels for FOSDEM, Collaborans headed east to Belarus to attend & speak at the winter session of the international conference for free/libre open source software developers and users, LVEE.
February 12, 2018 by Robert Foss | Blog
For the past few years a clear trend of containerization of applications and services has emerged. Having processes containerized is beneficial in a number of ways. It both improves portability and strengthens security.
January 29, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.15 was released yesterday, and it once again contained patches contributed by Collabora, including bigger patchsets like V4L2 Explicit Synchronization and UTF-8 case insensitive lookups for EXT4.
January 26, 2018 by Mark Filion | News & Events
Brussels, here we come! We're thrilled to be sponsoring this year's edition of FOSDEM, taking place in just over a week's time (February 3 & 4), at the Université Libre de Bruxelles. Come say hello, or catch one of a dozen talks given by Collaborans!
January 16, 2018 by Guillaume Tucker | Blog
The kernelci.org project aims at continuously testing the mainline Linux kernel, from stable branches to linux-next on a variety of platforms. When a revision fails to build or boot, kernel developers get informed via email reports.
January 10, 2018 by Guy Lunardi | Blog
Widely recognized as the best conference of its kind in Europe, the 2018 edition of FOSDEM promises to be no different, with a jam-packed schedule of over 600 lectures, lightning talks, developer rooms, and more.
December 22, 2017 by Gustavo Noronha | Blog
We recently assisted a customer who wanted to upgrade their system from X11 to Wayland. The problem: they use CEF as a runtime for web applications and CEF was not Wayland-ready.
December 19, 2017 by Mark Filion | News & Events
For a second time this year, Collabora is proud to be sponsoring the latest round (Round 15) of Outreachy internships! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the December 2017 - March 2018 semester.
December 14, 2017 by Jassie Badion | News & Events
With less than 12 days to go before Christmas, here are 12 reasons, from 12 different people who became Collaborans this year, on why you should consider joining our team!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
August 23, 2023 by Kara Bembridge | News & Events
Set in the captivating city of Berlin, All Systems Go! is ready to explore foundational user-space Linux technologies after a 4-year hiatus.
August 04, 2023 by Faith Ekstrand | News & Events
As of today, NVK, the new Vulkan driver for Nvidia GPUs, has landed in the main Mesa branch and will be included as an experimental driver in the 23.3 release of Mesa.
July 27, 2023 by Mark Filion | News & Events
If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.
July 26, 2023 by Kara Bembridge | News & Events
After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.
July 20, 2023 by Daniel Stone | News & Events
Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.
July 13, 2023 by Kara Bembridge | News & Events
With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.
July 06, 2023 by Erik Faye-Lund | News & Events
Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.
July 05, 2023 by Rogerio Alves Cardoso | News & Events
Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.
June 26, 2023 by Faith Ekstrand | News & Events
Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.
June 22, 2023 by Kara Bembridge | News & Events
Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.
May 29, 2023 by Kara Bembridge | News & Events
Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.
May 25, 2023 by Marius Vlad | News & Events
Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.
Here are the events we'll be attending in the coming weeks – come say hello!
November 19-21, Napa, CA, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium