Filter:All Blogs News & Events
June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 22, 2016 by Mark Filion | News and Events
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This week, we're introducing a new QA tool: a GStreamer tracer to track leaked objects.
June 20, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 07, 2016 by Mark Filion | News and Events
Collabora will be exhibiting at InfoComm 2016, the largest, most exciting event in the United States focused on the pro-AV industry, in Last Vegas on June 8-10, 2016.
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 03, 2018 by Corentin Noël | Blog
GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.
August 01, 2018 by Robert Foss | Blog
Presenting a new, hardware-backed, software graphics driver, built upon the Mesa gallium driver framework, which uses kernel kms drm nodes for memory allocation.
July 04, 2018 by Arnaud Rebillout | Blog
Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".
June 27, 2018 by Ana Guerrero López | Blog
In Debian and derivative systems, there are many ways to build images. The simplest tool of choice is often debootstrap. It works by downloading the .deb files from a mirror and unpacking them into a directory which can eventually be chrooted into.
June 25, 2018 by Olivier Crête | Blog
Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.
June 11, 2018 by Omar Akkila | Blog
Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.
June 05, 2018 by Mark Filion | Blog
In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.
May 29, 2018 by Omar Akkila | Blog
At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.
May 18, 2018 by Zeeshan Ali | Blog
Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.
August 30, 2022 by Frédéric Plourde | News & Events
Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.
August 16, 2022 by Kara Bembridge | News & Events
A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!
August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
Here are the events we'll be attending in the coming weeks – come say hello!
March 8-9, Berlin, Germany
March 14-16, Nuremberg, Germany
April 24-26, Brno, Czech Republic