October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 13, 2018 by Ezequiel Garcia | News & Events
Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
October 06, 2022 by Benjamin Gaignard | News & Events
The release of Linux 6.0 earlier this week brought a significant milestone: the H.265/HEVC user-space API was mainlined, the result of more than two years of efforts by our engineering team.
October 04, 2022 by Faith Ekstrand | News & Events
Say hello to a brand new, open-source Vulkan driver for NVIDIA hardware in Mesa, written almost entirely from scratch using the new official headers from NVIDIA.
September 29, 2022 by Marius Vlad | News & Events
Announced earlier this week, Weston 11.0 brings a number of highlights including optimizations in the DRM-backend, color management infrastructure code and multiple RDP improvements.
September 29, 2022 by Kara Bembridge | News & Events
This year's X. Org Developer's Conference (XDC) is teaming up with WineConf and FOSS XR in Minneapolis at the University of St. Thomas' Opus Hall for a jam-packed three day event.
September 27, 2022 by Kara Bembridge | News & Events
Adding a variety of expertise from across the globe, the departments of Core, Multimedia, Kernel, XR, People Operations, and DevOps now have more hands on deck. Discover a snapshot of our newest teammates!
September 12, 2022 by Mark Filion | News & Events
Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!
September 06, 2022 by Kara Bembridge | News & Events
Showcasing two new software demonstrations featuring machine learning, including backend video compression that runs on Panfrost, and a data quality assurance tool designed to integrate into the annotation pipeline.
August 30, 2022 by Frédéric Plourde | News & Events
Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.
August 16, 2022 by Kara Bembridge | News & Events
A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!
August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
Here are the events we'll be attending in the coming weeks – come say hello!
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium