October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 07, 2020 by George Kiagiadakis | Blog
An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.
April 02, 2024 by Frederic Plourde | News & Events
As we reflect on the strides made in recent months, it's remarkable to see how OpenXR and Monado have evolved and are shaping the future of XR development. Let's take a closer look at the progress made and noteworthy achievements.
March 22, 2024 by Kara Bembridge | News & Events
One of the largest trade fair of its kind, and a global platform for the embedded community, Embedded World will be taking place next month at the NürnbergMesse in the quaint city of Nuremberg, Germany
March 19, 2024 by Daniel Morin | News & Events
Thanks to sponsors like STMicroelectronics, Netflix, Living Optics, and ChromeOS, Collabora once again came in first place with the most contributors for this release, with 16 developers taking part.
March 11, 2024 by Muhammad Usama Anjum | News & Events
The latest Linux Kernel 6.8 release brings thousands of new lines of code, improving the core kernel, architecture support, networking, file systems, and more.
March 04, 2024 by Boris Brezillon | News & Events
Late last week, the long-awaited kernel driver supporting 10th-generation Arm Mali GPUs was merged into drm-misc. The existing Gallium driver support has also been extended, effectively enabling GPUs on Rockchip's RK3588 platforms.
March 01, 2024 by Helen Koike | News & Events
This initial version includes static checks (checkpatch and smatch for now) and build tests across various architectures and configurations, and introduces a flexible 'scenarios' mechanism for subsystem-specific extensions.
February 28, 2024 by Faith Ekstrand | News & Events
The merge request has landed, the non-conformant implementation warnings are gone, and NVK's Meson configuration now reads "nouveau" instead of "nouveau-experimental". It's now time to start shipping NVK to users!
February 26, 2024 by Kara Bembridge | News & Events
We've recently had some new faces join the team and we are delighted that our talented new joiners have readily jumped in to advance the open source mission.
February 15, 2024 by Mark Filion | News & Events
Collabora's engineers presented six talks over the course of the weekend, with topics including a review of recent improvements to GStreamer, a look at the state of video offloading on the Linux desktop, and more.
February 13, 2024 by Daniel Morin | News & Events
Engineers have widely adopted GStreamer to build video analytics pipelines, and while many companies have indeed built their machine learning analysis framework around GStreamer, no one had made the effort to contribute upstream, until now.
January 30, 2024 by Alexandros Frantzis | News & Events
2023 was a great year for the Wayland driver for Wine. After several merge requests, many people are now already able to use the latest Wine release to enjoy some of their favorite Windows applications in a completely X11-free environment!
January 25, 2024 by Marcus Edel | News & Events
By creating a real-time AI chatbot communication system using WhisperLive and WhisperSpeech, we have addressed the unnatural delay in current bot interactions for seamless conversation.
Here are the events we'll be attending in the coming weeks – come say hello!
September 18-19, Lyon, France
September 18-20, Vienna, Austria
September 23-25, Paris, France
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português