Filter:All Blogs News & Events
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 07, 2017 by Mark Filion | News and Events
Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 21, 2017 by Mark Filion | News and Events
Starting today, and for the next few days, Collaborans will be taking part in this year's Embedded Linux Conference North America, the "premier vendor-neutral technical conference for companies and developers using Linux in embedded products".
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
October 08, 2021 by Nícolas F. R. A. Prado | Blog
Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.
September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 10, 2021 by Lubosz Sarnecki | Blog
This summer, Christoph Haag and I had the pleasure of taking part in Google Summer of Code as mentors for xrdesktop, the Open Source project bringing the Linux desktop to VR on Valve's SteamVR & Monado. Here's what was accomplished.
June 23, 2021 by Daniel Almeida | Blog
Earlier this year, from January to April 2021, I worked on adding support for stateless decoders for GStreamer as part of a multimedia internship at Collabora. Here's a recap of this completed work.
June 17, 2021 by Marcus Edel | Blog
In our previous post, we presented a project backed by INVEST-AI which introduces a multi-stage neural network-based solution. Now let's dive into the machine learning details of our innovative, open source hand-tracking pipeline.
June 15, 2021 by Nícolas F. R. A. Prado | Blog
Initiated as a joint effort by the Google Chrome OS team and Collabora, the recent KernelCI hackfest brought the addition of new tests including the ability to detect regressions on the Linux kernel that can directly affect cameras.
June 14, 2021 by Erik Faye-Lund | Blog
There's a lot that has happened in the world of Zink since my last update, so let's see if I can bring you up to date on the most important stuff, including upstream development, support for OpenGL 4.6 & GLES 3.1, and more.
June 11, 2021 by Alyssa Rosenzweig | Blog
Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
Here are the events we'll be attending in the coming weeks – come say hello!
May 31 - June 2, Santa Clara, California