News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Running Weston on a Raspbian

June 03, 2016 by Robert Foss  |   Blog

Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…

Running Weston on a Raspbian

GStreamer Spring Hackfest 2016

May 25, 2016 by Olivier Crête  |   Blog

After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…

GStreamer Spring Hackfest 2016

News: Linux Kernel 4.6

May 18, 2016 by Mark Filion  |   News and Events

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!

News: Linux Kernel 4.6

Linux Kernel 4.6: More active Collabora contributors than ever before

May 17, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.

Linux Kernel 4.6: More active Collabora contributors than ever before

Event: GStreamer Spring Hackfest 2016

May 13, 2016 by Mark Filion  |   News and Events

Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!

Event: GStreamer Spring Hackfest 2016

Validating changes to KMS drivers with IGT

April 21, 2016 by Tomeu Vizoso  |   Blog

New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.

Validating changes to KMS drivers with IGT

Yocto and OpenEmbedded at Collabora

April 15, 2016 by Andrew Shadura  |   Blog

How the use of Yocto and OpenEmbedded helps corporations migrate to free software.

Yocto and OpenEmbedded at Collabora

Event: Apertis hands-on session, April 28

April 11, 2016 by Mark Filion  |   News and Events

On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…

Event: Apertis hands-on session, April 28

Collabora contributions to Linux Kernel 4.5

March 17, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.5 was released earlier this week, and once again Collabora engineers played a role in its development. In addition to their current projects, seven Collabora engineers contributed a total of 33 patches to the new Kernel.

Collabora contributions to Linux Kernel 4.5

A programmer's view on digital images: the essentials

February 16, 2016 by Pekka Paalanen  |   Blog

How is an uncompressed raster image laid out in computer memory? How is a pixel represented? What are stride and pitch and what do you need them for? How do you address a pixel in memory? How do you describe an image in memory? Pekka discusses the essential…

A programmer's view on digital images: the essentials

Vulkan 1.0 specification released with day-one support for Wayland

February 16, 2016 by Daniel Stone  |   Blog

Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.

Vulkan 1.0 specification released with day-one support for Wayland

News: Vulkan 1.0 specification released

February 16, 2016 by Mark Filion  |   News and Events

Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.

News: Vulkan 1.0 specification released

Quick hack: Speed up your GitLab CI

November 06, 2018 by Xavier Claessens  |   Blog

Did you know you could register your own PC, or a spare laptop collecting dust in a drawer, to get instant CI going on GitLab? Not only will you get faster CI, but you'll also reduce the queue on the shared runner for others!

Quick hack: Speed up your GitLab CI

Introducing Zink, an OpenGL implementation on top of Vulkan

October 31, 2018 by Erik Faye-Lund  |   Blog

For the last month or so, I've been playing with a new project during my work at Collabora, and as I've already briefly talked about at XDC 2018, it's about time to talk about it to a wider audience.

Introducing Zink, an OpenGL implementation on top of Vulkan

On the low adoption of automated testing in FOSS

October 18, 2018 by Alexandros Frantzis  |   Blog

For projects of any value and significance, having a comprehensive automated test suite is nowadays considered a standard software engineering practice. Why, then, don't we see more prominent FOSS projects employing this practice?

On the low adoption of automated testing in FOSS

Recently in Geoclue

October 12, 2018 by Zeeshan Ali  |   Blog

After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.

Recently in Geoclue

The beauty of Open Source

October 10, 2018 by Martyn Welch  |   Blog

Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.

The beauty of Open Source

MicroDebConf Brasilia

October 02, 2018 by Lucas Kanashiro  |   Blog

Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.

MicroDebConf Brasilia

Virtme: The kernel developers' best friend

September 18, 2018 by Ezequiel Garcia  |   Blog

When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.

Virtme: The kernel developers' best friend

Cambridge XMPP Sprint

August 30, 2018 by Maxime Buquet  |   Blog

Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.

Cambridge XMPP Sprint

Testing Chromebooks with LAVA on kernelci.org

August 29, 2018 by Guillaume Tucker  |   Blog

In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.

Testing Chromebooks with LAVA on kernelci.org

Quick hack: git reset upstream

August 27, 2018 by Robert Foss  |   Blog

Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.

Quick hack: git reset upstream

En route to a robust GPU device selection in GL

August 21, 2018 by Emil Velikov  |   Blog

A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.

En route to a robust GPU device selection in GL

Cross-compilation made easy for GNOME Builder

August 03, 2018 by Corentin Noël  |   Blog

GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.

Cross-compilation made easy for GNOME Builder

Kernel 5.19: Probably the final release of the 5.x series

August 02, 2022 by Cristian Ciocaltea  |   News & Events

As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!

Kernel 5.19: Probably the final release of the 5.x series

Weston 10.0.1 - a bug-fix release

July 05, 2022 by Marius Vlad  |   News & Events

The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.

Weston 10.0.1 - a bug-fix release

Adding even more heads for the group picture

June 21, 2022 by Kara Bembridge  |   News & Events

Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.

Adding even more heads for the group picture

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Kernel 5.17: Solid & steady

March 31, 2022 by Sebastian Fricke  |   News & Events

While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.

Kernel 5.17: Solid & steady

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Black Valley

July 15-16, Oslo, Norway

DebConf

July 17-24, Prizren, Kosovo

COSCUP

July 30-31, Taiwan

SIGGRAPH

August 8-11, Vancouver, Canada

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.