Filter:All Blogs News & Events
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
May 01, 2017 by Helen Fornazier | News & Events
Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 18, 2017 by Mark Filion | News and Events
Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
February 09, 2017 by Varad Gautam | Blog
Over the past few weeks, I have been working for Collabora on plumbing DRM format modifier support across a number of components in the graphics stack. This post documents the work and the related consequences/implications.
January 26, 2017 by Gustavo Padovan | Blog
In the last two articles we talked about how Explicit Fencing can help the graphics pipeline in general and what happened on the effort to upstream the Android Sync Framework. Now on the third and final post of this series we will go through the Explicit…
January 24, 2017 by Tomeu Vizoso | Blog
Last month I gave a short talk about the Chamelium board from the ChromeOS team, a board that is getting more and more usage outside of Google as it can help you automate the testing of your display (and not only!) code and hardware.
January 16, 2017 by Frédéric Dalleau | Blog
A look at the fundamentals of building and booting a kernel in QEMU using debootstrap, so you have the needed infrastructure to test your kernel changes in QEMU.
December 14, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.9 was released this week and once more Collabora developers took part on the kernel development cycle. This time we contributed 36 patches by 11 different developers, our highest number of single contributors in a kernel release ever. Remember…
November 22, 2016 by Gustavo Noronha | Blog
Our ongoing work on improving WebKitGTK+ performance brought us to take a closer look as to why GTK+ was experiencing significant speed issues when used with Wayland and HiDPI screens, revealing the root cause to be within the lower level toolkit.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
Here are the events we'll be attending in the coming weeks – come say hello!
May 31 - June 2, Santa Clara, California