News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Recently in Geoclue

October 12, 2018 by Zeeshan Ali  |   Blog

After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.

Recently in Geoclue

FOSSCOMM

October 12, 2018 by Mark Filion  |   News & Events

We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!

FOSSCOMM

The beauty of Open Source

October 10, 2018 by Martyn Welch  |   Blog

Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.

The beauty of Open Source

MicroDebConf Brasilia

October 02, 2018 by Lucas Kanashiro  |   Blog

Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.

MicroDebConf Brasilia

Paris, A Coruna & Berlin

September 20, 2018 by Mark Filion  |   News & Events

Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?

Paris, A Coruna & Berlin

Virtme: The kernel developers' best friend

September 18, 2018 by Ezequiel Garcia  |   Blog

When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.

Virtme: The kernel developers' best friend

Open Source at IBC

September 10, 2018 by Mark Filion  |   News & Events

From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!

Open Source at IBC

Cambridge XMPP Sprint

August 30, 2018 by Maxime Buquet  |   Blog

Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.

Cambridge XMPP Sprint

Testing Chromebooks with LAVA on kernelci.org

August 29, 2018 by Guillaume Tucker  |   Blog

In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.

Testing Chromebooks with LAVA on kernelci.org

Open Source Summit

August 28, 2018 by Mark Filion  |   News & Events

Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!

Open Source Summit

Quick hack: git reset upstream

August 27, 2018 by Robert Foss  |   Blog

Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.

Quick hack: git reset upstream

En route to a robust GPU device selection in GL

August 21, 2018 by Emil Velikov  |   Blog

A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.

En route to a robust GPU device selection in GL

A roadmap for VirtIO Video on ChromeOS: part 2

October 02, 2023 by Daniel Almeida  |   Blog

This second installment explores the Rust libraries Collabora developed to decode video and how these libraries are used within ARCVM to eventually remove CrosVM's dependency on the Chrome codec stack.

A roadmap for VirtIO Video on ChromeOS: part 2

Persian Rug, Part 2 - Other ways to make object soups in Rust

September 27, 2023 by Edmund Smith  |   Blog

Why is creating object graphs hard in Rust? In part 1, we looked at a basic pattern, where two types of objects refer to one another. In this part we'll follow up in more detail and examine the different approaches that can be applied.

Persian Rug, Part 2 - Other ways to make object soups in Rust

WhisperSpeech: Exploring new horizons in text-to-speech technology

September 13, 2023 by Jakub Piotr Clapa  |   Blog

Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.

WhisperSpeech: Exploring new horizons in text-to-speech technology

Bridging IIO and Input in Linux

August 21, 2023 by Eugen Hristev  |   Blog

In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.

Bridging IIO and Input in Linux

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

August 10, 2023 by Paweł Wieczorek  |   Blog

Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

Persian Rug - It really ties the Rust room together

August 09, 2023 by Edmund Smith  |   Blog

Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.

Persian Rug - It really ties the Rust room together

Triple Threat: The Power of Transcription, Summary, and Translation

August 03, 2023 by Marcus Edel  |   Blog

At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.

Triple Threat: The Power of Transcription, Summary, and Translation

Booting on Radxa's Rock-5B without any media used

July 31, 2023 by Eugen Hristev  |   Blog

I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.

Booting on Radxa's Rock-5B without any media used

Radxa's Rock 5A one step closer to U-boot mainline

July 18, 2023 by Eugen Hristev  |   Blog

I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.

Radxa's Rock 5A one step closer to U-boot mainline

A roadmap for VirtIO Video on Chrome OS, part 1

June 20, 2023 by Daniel Almeida  |   Blog

Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.

A roadmap for VirtIO Video on Chrome OS, part 1

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

June 15, 2023 by Ashok Sidipotu  |   Blog

Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

MLfix to quickly fix datasets

June 08, 2023 by Vineet Suryan  |   Blog

Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.

MLfix to quickly fix datasets

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Laval Virtual: OpenXR master class in VR!

May 18, 2020 by Mark Filion  |   News & Events

A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.

Laval Virtual: OpenXR master class in VR!

xrdesktop 0.14 with OpenXR support is here!

May 08, 2020 by Lubosz Sarnecki  |   News & Events

Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.

xrdesktop 0.14 with OpenXR support is here!

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.