News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Open Source at IBC

September 10, 2018 by Mark Filion  |   News & Events

From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!

Open Source at IBC

Cambridge XMPP Sprint

August 30, 2018 by Maxime Buquet  |   Blog

Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.

Cambridge XMPP Sprint

Testing Chromebooks with LAVA on kernelci.org

August 29, 2018 by Guillaume Tucker  |   Blog

In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.

Testing Chromebooks with LAVA on kernelci.org

Open Source Summit

August 28, 2018 by Mark Filion  |   News & Events

Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!

Open Source Summit

Quick hack: git reset upstream

August 27, 2018 by Robert Foss  |   Blog

Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.

Quick hack: git reset upstream

En route to a robust GPU device selection in GL

August 21, 2018 by Emil Velikov  |   Blog

A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.

En route to a robust GPU device selection in GL

Linux Kernel 4.18

August 13, 2018 by Ezequiel Garcia  |   News & Events

Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.

Linux Kernel 4.18

Cross-compilation made easy for GNOME Builder

August 03, 2018 by Corentin Noël  |   Blog

GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.

Cross-compilation made easy for GNOME Builder

kms_swrast: A hardware-backed graphics driver

August 01, 2018 by Robert Foss  |   Blog

Presenting a new, hardware-backed, software graphics driver, built upon the Mesa gallium driver framework, which uses kernel kms drm nodes for memory allocation.

kms_swrast: A hardware-backed graphics driver

Collabora continues to grow

July 31, 2018 by Jassie Badion  |   News & Events

Comprised of some of the most motivated and active Open Source contributors and maintainers around the world, our team shares a passion for technology and Open Source, as do these newest members. Welcome Gert, Gustavo, Erik, Christoph, Ryan & Ana!

Collabora continues to grow

DebConf18

July 26, 2018 by Mark Filion  |   News & Events

Collabora is heading East to sponsor & attend DebConf18, the annual Debian conference! The week-long event takes place for the first time in Asia, at the National Chiao Tung University Microelectronics & Information Research Center, in Hsinchu Taiwan.

DebConf18

The docker.io Debian package is back to life

July 04, 2018 by Arnaud Rebillout  |   Blog

Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".

The docker.io Debian package is back to life

Persian Rug, Part 2 - Other ways to make object soups in Rust

September 27, 2023 by Edmund Smith  |   Blog

Why is creating object graphs hard in Rust? In part 1, we looked at a basic pattern, where two types of objects refer to one another. In this part we'll follow up in more detail and examine the different approaches that can be applied.

Persian Rug, Part 2 - Other ways to make object soups in Rust

WhisperSpeech: Exploring new horizons in text-to-speech technology

September 13, 2023 by Jakub Piotr Clapa  |   Blog

Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.

WhisperSpeech: Exploring new horizons in text-to-speech technology

Bridging IIO and Input in Linux

August 21, 2023 by Eugen Hristev  |   Blog

In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.

Bridging IIO and Input in Linux

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

August 10, 2023 by Paweł Wieczorek  |   Blog

Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.

Pushing testing laboratory performance limits by benchmarking LAVA - Part 1

Persian Rug - It really ties the Rust room together

August 09, 2023 by Edmund Smith  |   Blog

Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.

Persian Rug - It really ties the Rust room together

Triple Threat: The Power of Transcription, Summary, and Translation

August 03, 2023 by Marcus Edel  |   Blog

At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.

Triple Threat: The Power of Transcription, Summary, and Translation

Booting on Radxa's Rock-5B without any media used

July 31, 2023 by Eugen Hristev  |   Blog

I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.

Booting on Radxa's Rock-5B without any media used

Radxa's Rock 5A one step closer to U-boot mainline

July 18, 2023 by Eugen Hristev  |   Blog

I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.

Radxa's Rock 5A one step closer to U-boot mainline

A roadmap for VirtIO Video on Chrome OS, part 1

June 20, 2023 by Daniel Almeida  |   Blog

Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.

A roadmap for VirtIO Video on Chrome OS, part 1

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

June 15, 2023 by Ashok Sidipotu  |   Blog

Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

MLfix to quickly fix datasets

June 08, 2023 by Vineet Suryan  |   Blog

Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.

MLfix to quickly fix datasets

USB 3.0 preliminary support in U-boot for Radxa Rock-5B

May 31, 2023 by Eugen Hristev  |   Blog

A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.

USB 3.0 preliminary support in U-boot for Radxa Rock-5B

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Laval Virtual: OpenXR master class in VR!

May 18, 2020 by Mark Filion  |   News & Events

A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.

Laval Virtual: OpenXR master class in VR!

xrdesktop 0.14 with OpenXR support is here!

May 08, 2020 by Lubosz Sarnecki  |   News & Events

Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.

xrdesktop 0.14 with OpenXR support is here!

Service process and out of process compositing in Monado

April 30, 2020 by Lubosz Sarnecki  |   News & Events

A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.

Service process and out of process compositing in Monado

Say hello to the newest Collaborans!

April 21, 2020 by Erica Ryoo  |   News & Events

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!

Say hello to the newest Collaborans!

Projects and progress in Linux kernel 5.6

March 31, 2020 by Helen Koike  |   News & Events

Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.

Projects and progress in Linux kernel 5.6

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

March 30, 2020 by Mark Filion  |   News & Events

This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

Introducing OpenCL and OpenGL on DirectX

March 24, 2020 by Erik Faye-Lund  |   News & Events

Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.

Introducing OpenCL and OpenGL on DirectX

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.