News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Quick hack: Raspberry Pi meets Linux kernel mainline

March 12, 2019 by Helen Koike  |   Blog

With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.

Quick hack: Raspberry Pi meets Linux kernel mainline

Linux Kernel 5.0

March 06, 2019 by Gaël Portay  |   News & Events

The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!

Linux Kernel 5.0

News from the Debian Cloud Team

March 05, 2019 by Lucas Kanashiro  |   Blog

Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!

News from the Debian Cloud Team

Automotive Linux in Tokyo

March 04, 2019 by Mark Filion  |   News & Events

Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.

Automotive Linux in Tokyo

Panfrost update: A new kernel driver

March 04, 2019 by Tomeu Vizoso  |   Blog

Following two months of work to develop a new kernel driver for Midgard and Bifrost GPUs, the kernel side of Panfrost is now in a form close to be acceptable in the mainline Linux kernel.

Panfrost update: A new kernel driver

Embedded World 2019

February 20, 2019 by Mark Filion  |   News & Events

Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!

Embedded World 2019

Modern USB gadget on Linux & how to integrate it with systemd (Part 1)

February 18, 2019 by Andrzej Pietrasiewicz  |   Blog

A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.

Modern USB gadget on Linux & how to integrate it with systemd (Part 1)

FOSDEM 2019 - Recorded presentations (videos)

February 15, 2019 by Mark Filion  |   Blog

From the latest on Open Source projects Zink (OpenGL on Vulkan) and VirGL (virtual 3D GPU for QEMU), to a state of the union on GStreamer embedded, and a look at how the KernelCI project is getting a second breath, Collaborans presented in five devrooms.

FOSDEM 2019 - Recorded presentations (videos)

FOSDEM 2019

January 23, 2019 by Mark Filion  |   News & Events

In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!

FOSDEM 2019

Linux Kernel 4.20

January 07, 2019 by Fabien Lahoudere  |   News & Events

A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.

Linux Kernel 4.20

A Panfrost milestone

January 07, 2019 by Tomeu Vizoso  |   Blog

Panfrost, a project that delivers an open source implementation of a driver for the newest versions of the Mali family of GPUs, now includes support for running Wayland compositors and zero-copy GPU-accelerated clients.

A Panfrost milestone

Outreachy - Round 17

December 20, 2018 by Mark Filion  |   News & Events

As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for…

Outreachy - Round 17

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Growing for the road ahead

June 21, 2021 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!

Growing for the road ahead

Wine on Wayland meets Vulkan, multi-monitor support & more

June 07, 2021 by Alexandros Frantzis  |   News & Events

We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.

Wine on Wayland meets Vulkan, multi-monitor support & more

A libweston-based compositor for Automotive Grade Linux

June 02, 2021 by Marius Vlad  |   News & Events

Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.

A libweston-based compositor for Automotive Grade Linux

Bridging the OpenGL and Vulkan divide

May 27, 2021 by Rohan Garg  |   News & Events

Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.

Bridging the OpenGL and Vulkan divide

Kernel 5.12: Working to close the gap

May 04, 2021 by Ariel D'Alessandro  |   News & Events

With their latest contributions all around the kernel, notably to the Video4Linux APIs and hardware enablement, Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.

Kernel 5.12: Working to close the gap

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

March 25, 2021 by Boris Brezillon  |   News & Events

The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

Linaro Virtual Connect - Spring 2021

March 22, 2021 by Mark Filion  |   News & Events

Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.

Linaro Virtual Connect - Spring 2021

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

March 10, 2021 by Erik Faye-Lund  |   News & Events

One year ago, we announced a new partnership with Microsoft to build OpenGL mapping layers to DirectX 12. Today, we're excited to share that the we have passed the OpenGL 3.3 conformance tests, and have now upstreamed the D3D12 driver in Mesa 3D!

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

Wine on Wayland: An exciting first update

February 19, 2021 by Alexandros Frantzis  |   News & Events

Two months ago we announced a first proposal for a Wayland driver for Wine, the compatibility layer for Windows applications. Here's an update on this effort, which contains more details and instructions for building and running the Wayland driver.

Wine on Wayland: An exciting first update

New year, new kernel: Collabora's contributions to Linux 5.11

February 17, 2021 by Ezequiel Garcia  |   News & Events

The first kernel release of 2021 brings a number of highlights contributed by Collaborans, including the new Syscall User Dispatch mechanism, and the destaging of both the H.264 stateless decoding interface and the Rockchip ISP driver.

New year, new kernel: Collabora's contributions to Linux 5.11

Monado 21.0.0, an officially conformant OpenXR implementation!

February 15, 2021 by Jakob Bornecrantz  |   News & Events

Monado, the OpenXR runtime for Linux, is now officially conformant! In recognition of this milestone, a first major release version of the OpenXR runtime for Linux is now available, bringing with it a SteamVR driver!

Monado 21.0.0, an officially conformant OpenXR implementation!

One weekend, two conferences

January 19, 2021 by Mark Filion  |   News & Events

Join us as our 2021 conference schedule gets underway this weekend with the virtual editions of linux.conf.au and MiniDebConf India! Collaborans will be giving talks on recent projects including futex2, and Open Source AI video analytics with Panfrost.

One weekend, two conferences

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

AGL All Member Meeting

July 17-18, Berlin, Germany

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.