News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

SVVR 2016: Virtual reality in the Valley

June 27, 2016 by Frédéric Plourde  |   Blog

I’ve been fortunate enough lately to attend the largest virtual reality professional event/conference : SVVR. This virtual reality conference’s been held each year in the Silicon Valley for 3 years now. This year, it showcased more than 100 VR companies…

SVVR 2016: Virtual reality in the Valley

GTK Hackfest 2016

June 22, 2016 by Simon McVittie  |   Blog

I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.

GTK Hackfest 2016

News: GStreamer leaks tracer

June 22, 2016 by Mark Filion  |   News and Events

At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This week, we're introducing a new QA tool: a GStreamer tracer to track leaked objects.

News: GStreamer leaks tracer

GStreamer leaks tracer

June 20, 2016 by Guillaume Desmottes  |   Blog

At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.

GStreamer leaks tracer

Linux Kernel: memory corruption - debug tricks

June 10, 2016 by Helen Fornazier  |   Blog

When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…

Linux Kernel: memory corruption - debug tricks

Event: InfoComm 2016

June 07, 2016 by Mark Filion  |   News and Events

Collabora will be exhibiting at InfoComm 2016, the largest, most exciting event in the United States focused on the pro-AV industry, in Last Vegas on June 8-10, 2016.

Event: InfoComm 2016

Flatpak on Debian

June 06, 2016 by Simon McVittie  |   Blog

Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…

Flatpak on Debian

Running Weston on a Raspbian

June 03, 2016 by Robert Foss  |   Blog

Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…

Running Weston on a Raspbian

GStreamer Spring Hackfest 2016

May 25, 2016 by Olivier Crête  |   Blog

After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…

GStreamer Spring Hackfest 2016

News: Linux Kernel 4.6

May 18, 2016 by Mark Filion  |   News and Events

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!

News: Linux Kernel 4.6

Linux Kernel 4.6: More active Collabora contributors than ever before

May 17, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.

Linux Kernel 4.6: More active Collabora contributors than ever before

Event: GStreamer Spring Hackfest 2016

May 13, 2016 by Mark Filion  |   News and Events

Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!

Event: GStreamer Spring Hackfest 2016

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Kernel 5.16: A new release for a new year

January 20, 2022 by André Almeida  |   News & Events

With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.

Kernel 5.16: A new release for a new year

First up in 2022: linux.conf.au!

January 11, 2022 by Mark Filion  |   News & Events

The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.

First up in 2022: linux.conf.au!

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Kernel 5.14: 30 years in the making and still improving

September 07, 2021 by Nícolas F. R. A. Prado  |   News & Events

With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.

Kernel 5.14: 30 years in the making and still improving

Linaro Virtual Connect - Fall 2021

September 01, 2021 by Mark Filion  |   News & Events

September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!

Linaro Virtual Connect - Fall 2021

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

linux.conf.au 2022

14-16 January, Online

FOSDEM

5-6 February, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.