June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
April 15, 2016 by Andrew Shadura | Blog
How the use of Yocto and OpenEmbedded helps corporations migrate to free software.
April 11, 2016 by Mark Filion | News and Events
On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…
March 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.5 was released earlier this week, and once again Collabora engineers played a role in its development. In addition to their current projects, seven Collabora engineers contributed a total of 33 patches to the new Kernel.
February 16, 2016 by Pekka Paalanen | Blog
How is an uncompressed raster image laid out in computer memory? How is a pixel represented? What are stride and pitch and what do you need them for? How do you address a pixel in memory? How do you describe an image in memory? Pekka discusses the essential…
February 16, 2016 by Daniel Stone | Blog
Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.
April 23, 2020 by Alyssa Rosenzweig | Blog
The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!
April 20, 2020 by Mark Filion | Blog
Google Open Source has announced their 2020 first quarter Google Open Source Peer Bonus winners, and Alyssa Rosenzweig, Software Engineer at Collabora, is among the recipients!
April 17, 2020 by Andre Almeida | Blog
In my previous blog post, we discussed the importance of testing, what is fuzzing, and how the syzkaller fuzzes the kernel in order to find bugs. Now, let’s install the tool and starting using it to improve our code base.
April 14, 2020 by Mark Filion | Blog
Open Source software development thrives on remote collaboration, and continues to do so in 2020, with multiple projects announcing releases in the first quarter.
April 10, 2020 by Pekka Paalanen | Blog
When you work on a piece of software, you usually want to be able to build and test it manually on your local system, but without compromising your system or destabilizing the distribution provided software.
April 08, 2020 by Andrzej Pietrasiewicz | Blog
Rockchip SoCs, notably the RK3399, are popular in devices such as Chromebooks and single-board computers. Indeed, they bring some interesting features, one of them being the Arm Frame Buffer Compression (AFBC).
March 26, 2020 by Andre Almeida | Blog
With the code base of the Linux kernel constantly changing and deployed in devices around the world, performing proper testing is crucial. Here's a look at syzkaller, a valuable tool widely adopted by the kernel community to detect bugs in the kernel.
March 19, 2020 by Stéphane Cerveau | Blog
GStreamer relies on multiple repositories such as base and good to build its ecosystem, and now owns more than 30 projects in Gitlab. So, a unified tool/build system has always been necessary to build a specified version.
March 10, 2020 by Olivier Potin | Blog
Here at Collabora, we trust our people to work remotely, we give them full responsibility for their output, and we believe it helps creating an even stronger internal culture and comes with some other positives.
March 05, 2020 by Julian Bouzas | Blog
PipeWire 0.3 was released a few days ago, marking a big step forward in the effort of making this emerging media service the core layer of all multimedia on Linux.
February 27, 2020 by Alyssa Rosenzweig | Blog
Panfrost's ES 3.0 support has landed in upstream Mesa and works with a mainline Linux kernel. The support is still early, but if you're feeling adventurous, feel free to give it a try on your favourite ES 3.0 applications and games.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
Here are the online events we'll be attending in the coming weeks – join us!
3-4 August, Online
22-29 August, Online
15-17 September, Online
20-24 September, Online