April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 18, 2017 by Mark Filion | News and Events
Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
November 28, 2018 by Martyn Welch | Blog
In an ideal world, everyone would implicitly understand that it just makes good business sense to upstream some of the modifications made when creating your Linux powered devices. Unfortunately, this is a long way from being common knowledge.
November 23, 2018 by Alexandros Frantzis | Blog
How can we measure the comprehensiveness of a test suite? Code coverage is the standard metric used in the industry and makes intuitive sense. However, it can often present some difficulties for large scale surveys.
November 21, 2018 by Gabriel Krisman Bertazi | Blog
A real-world use case of eBPF tracing to understand file access patterns in the Linux kernel and optimize large applications.
November 06, 2018 by Xavier Claessens | Blog
Did you know you could register your own PC, or a spare laptop collecting dust in a drawer, to get instant CI going on GitLab? Not only will you get faster CI, but you'll also reduce the queue on the shared runner for others!
October 31, 2018 by Erik Faye-Lund | Blog
For the last month or so, I've been playing with a new project during my work at Collabora, and as I've already briefly talked about at XDC 2018, it's about time to talk about it to a wider audience.
October 18, 2018 by Alexandros Frantzis | Blog
For projects of any value and significance, having a comprehensive automated test suite is nowadays considered a standard software engineering practice. Why, then, don't we see more prominent FOSS projects employing this practice?
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
June 21, 2019 by Jassie Badion | News & Events
For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!
May 30, 2019 by Mark Filion | News & Events
A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.
May 09, 2019 by André Almeida | News & Events
Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.
May 06, 2019 by Aaron Boxer | News & Events
After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.
April 09, 2019 by Nicolas Dufresne | News & Events
Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.
March 29, 2019 by Mark Filion | News & Events
Next week, Collaborans will be in Bangkok, Thailand, to participate in the 25th edition of Linaro Connect, a gathering of the world's leading open source engineers working on Arm. Tomeu Vizoso and Gustavo Padovan will be in attendance to present Panfrost.
March 18, 2019 by Jakob Bornecrantz | News & Events
Following the release of the OpenXR 0.90 Provisional Specification by The Khronos Group, Collabora is proud to announce Monado, an open source implementation of the newly released OpenXR spec.
March 13, 2019 by Mark Filion | News & Events
Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!
March 06, 2019 by Gaël Portay | News & Events
The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!
March 04, 2019 by Mark Filion | News & Events
Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.
February 20, 2019 by Mark Filion | News & Events
Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!
Here are the events we'll be attending in the coming weeks – come say hello!
October 1-7, Barcelona, Spain
October 4-6, Minneapolis, MN, USA
October 11-13, London, UK
August 8-11, Phoenix, AZ, USA