September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
August 06, 2025 by Daniel Almeida | Blog
This second post in the Tyr series dives deeper into GPU driver internals by using the Vulkan-based VkCube application to explain how User Mode Drivers (UMDs) and Kernel Mode Drivers (KMDs) work together to execute GPU workloads.
July 22, 2025 by Olivier Crête | Blog
Getting into kernel development can be daunting. There are layers upon layers of knowledge to master, but no clear roadmap, especially when it comes to debugging drivers or navigating userspace-kernel issues.
July 15, 2025 by Olivier Crête | Blog
This past May, we met with the community at the GStreamer Spring Hackfest in Nice, France, and were able to make great strides, including the integration of AI/ML workflows in GStreamer.
July 03, 2025 by George Kiagiadakis | Blog
As part of the activities Embedded Recipes in Nice, France, Collabora hosted a PipeWire workshop/hackfest, an opportunity for attendees to meet face-to-face with PipeWire developers and participate in direct discussions about the future of PipeWire.
June 25, 2025 by Tathagata Roy | Blog
In collaboration with Inria, the French Institute for Research in Computer Science and Automation, Tathagata Roy shares the progress made over the past year on the CoccinelleForRust project, co-sponsored by Collabora
June 23, 2025 by Nicolas Dufresne | Blog
Last month in Nice, active media developers came together for the annual Linux Media Summit to exchange insights and tackle ongoing challenges in the media subsystem. Here’s a brief summary of the key discussions and upcoming areas of focus.
June 09, 2025 by Gustavo Noronha | Blog
In this final article based on Matt Godbolt's talk on making APIs easy to use and hard to misuse, I will discuss locking, an area where C++ has produced some interesting ideas, most notably something called RAII — Resource Acquisition Is Initialization.
May 21, 2025 by Gustavo Noronha | Blog
In this second article of a three-part series, I look at how Matt Godbolt uses modern C++ features to try to protect against misusing an API that deals with destructive state transition based on a talk he gave on making code easy to use and hard to misuse.
May 12, 2025 by Aaron Boxer | Blog
Powerful video analytics pipelines are easy to make when you're well-equipped. Combining GStreamer and Machine Learning frameworks are the perfect duo to run complex models across multiple streams.
May 06, 2025 by Gustavo Noronha | Blog
Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.
April 29, 2025 by George Kiagiadakis | Blog
Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.
April 24, 2025 by Martyn Welch | Blog
Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.
February 21, 2023 by Daniel Almeida | News & Events
With more SoC support, a new V4L2 driver and a new dma-buf locking convention among its contributions, Collabora was one of the most active employers for this latest kernel development cycle.
February 08, 2023 by Olivier Crête | News & Events
Improved support for hardware accelerated video decoders, new GTK+ integration for Wayland rendering, and further Meson enhancements to make GStreamer shine on embedded, Collabora's multimedia team made a number of key contributions for this latest release.
January 20, 2023 by Kara Bembridge | News & Events
After two years of hosting the event virtually, Brussels will once again welcome attendees on February 4 & 5 on the old stomping grounds of the ULB Solbosch Campus. Collabora will be presenting 8 different talks, in 7 devrooms as well as on the main track!
December 29, 2022 by Kara Bembridge | News & Events
With only a few months passing since our last new joiner update, it should come as no surprise that the Collabora crowd has expanded yet again. Our flexible disposition affords us an exceptional bunch to onboard when opportunity knocks.
December 19, 2022 by Kara Bembridge | News & Events
Contributing to the Vulkan Working Group since 2015, Faith has continues to make a significant impact. Her expertise and diligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight.
December 13, 2022 by AngeloGioacchino Del Regno | News & Events
Collabora's contributions include ongoing upstreaming of the RockChip RK3588 and MediaTek Helio X10 (MT6795) SoCs, numerous bug fixes and improvements for Cedrus and Hantro IPs, and memory shrinker support for the VirtIO-GPU driver.
December 12, 2022 by Alexandros Frantzis | News & Events
The focus in 2022 was on maturing the Wayland driver and keeping up to date with the Wine upstream internal changes, which involved updating it for the latest internal driver APIs, and making preparations to support WoW64.
December 06, 2022 by Adrian Ratiu | News & Events
After waiting in the Linux-next integration tree for about 18 months, the basic Rust infrastructure finally landed in the mainline Linux kernel with the imminent release of v6.1.
December 01, 2022 by Kara Bembridge | News & Events
Coming up next week at the Automotive Linux Summit in Yokohama and virtually, Marius Vlad and Daniel Stone will present the latest on the AGL Wayland compositor, and the current state of graphics virtualization upstream.
November 16, 2022 by Kara Bembridge | News & Events
Clear your schedules, this weekend's Capitole du Libre is calling your name for all things open source! Gathering in the "Pink City" of Toulouse, participants are welcome to attend with free admission from November 19 to 20 at the INP-ENSEEIHT.
November 10, 2022 by Kara Bembridge | News & Events
Making our grand debut, Collabora will be attending electronica in Munich for the first time! Diving into the world of electronics alongside the leading examples of the industry, we're excited to partake on all fronts.
October 14, 2022 by Shreeya Patel | News & Events
Collabora's contributions include mainlining the HEVC uAPI, adding VirtIO documentation, upstreaming MediaTek smartphones, and adding support for two new Chromebooks and for the Mali-G57 GPU in the Panfrost kernel driver.
Here are the events we'll be attending in the coming weeks – come say hello!
August 25-27, Amsterdam, Netherlands
September 12-15, Amsterdam, Netherlands
September 16, Amsterdam, Netherlands
September 17-18, Lyon, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português