January 16, 2020 by Erica Ryoo | News & Events
What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!
December 20, 2019 by Alyssa Rosenzweig | Blog
If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!
December 09, 2019 by Julian Bouzas | Blog
PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.
December 02, 2019 by Enric Balletbò i Serra | News & Events
Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.
November 26, 2019 by Aaron Boxer | Blog
With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.
November 20, 2019 by Jassie Badion | News & Events
As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!
October 30, 2019 by Mark Filion | News & Events
Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.
October 28, 2019 by Guillaume Tucker | News & Events
The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.
October 25, 2019 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.
October 24, 2019 by Erik Faye-Lund | Blog
I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.
October 09, 2019 by Dafna Hirschfeld | Blog
Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.
October 03, 2019 by Pekka Paalanen | Blog
What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.
September 13, 2023 by Jakub Piotr Clapa | Blog
Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.
August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
June 22, 2023 by Kara Bembridge | News & Events
Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.
May 29, 2023 by Kara Bembridge | News & Events
Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.
May 25, 2023 by Marius Vlad | News & Events
Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.
April 25, 2023 by Muhammad Usama Anjum | News & Events
Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.
April 20, 2023 by Kara Bembridge | News & Events
Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!
March 27, 2023 by Kara Bembridge | News & Events
It’s no secret that Tech has faced some setbacks lately, namely on the headcount front. Despite these uncertainties, Collabora has had the privilege of increasing our roster with new teammates.
March 14, 2023 by Frédéric Plourde | News & Events
We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program.
March 13, 2023 by Mark Filion | News & Events
As a recent new member of STMicroelectronics' Partner Program, we're excited to be showcasing the STM32MP1 at Embedded World this week, our first demo featuring the STM32 platform.
March 09, 2023 by Kara Bembridge | News & Events
Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase
February 24, 2023 by Moses Turner | News & Events
Work on this new tracking method started around January 2022. Now, after a little over a year of development, Monado's "Mercury" hand tracking is finally ready for the public to use!
February 23, 2023 by Boris Brezillon | News & Events
A look into the new job-scheduling model with Mali GPUs, their support in the new PanCSF DRM driver, and what it means as the rest of the ecosystem also moves to firmware-assisted scheduling.
February 21, 2023 by Daniel Almeida | News & Events
With more SoC support, a new V4L2 driver and a new dma-buf locking convention among its contributions, Collabora was one of the most active employers for this latest kernel development cycle.
Here are the events we'll be attending in the coming weeks – come say hello!
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium