October 15, 2018 by Mark Filion | News & Events
This week, two Collaborans will be in Dresden, Germany to take part in the AGL All Member Meeting. George Kiagiadakis and Daniel Stone will be in attendance, with the former also giving a presentation on the latest happenings in upstream multimedia.
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
October 22, 2020 by Mylène Josserand | News & Events
Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.
October 06, 2020 by Stéphane Cerveau | News & Events
A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.
September 15, 2020 by Mark Filion | News & Events
The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
Here are the events we'll be attending in the coming weeks – come say hello!
Sept. 15 - 18, Amsterdam, Netherlands
Sept. 25 - 27, Paris, France
Sept. 25 - 26, A Coruña, Spain
Sept. 28 - 29, Paris, France