News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Virglrenderer and the state of virtualized virtual worlds

August 28, 2019 by Gert Wollny  |   Blog

With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.

Virglrenderer and the state of virtualized virtual worlds

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Panfrost & Wayland on a Rockchip board

August 06, 2019 by Rohan Garg  |   Blog

Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.

Panfrost & Wayland on a Rockchip board

What's new in OpenXR 1.0 & Monado?

August 02, 2019 by Ryan Pavlik  |   Blog

As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.

What's new in OpenXR 1.0 & Monado?

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Zink: Summer Update & SIGGRAPH 2019

July 25, 2019 by Erik Faye-Lund  |   Blog

There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!

Zink: Summer Update & SIGGRAPH 2019

Collabora & Debian 10 (Buster)

July 25, 2019 by Andrej Shadura  |   News & Events

With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!

Collabora & Debian 10 (Buster)

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Patch submitted to introduce GitLab-CI pipeline for Linux kernel testing

March 01, 2024 by Helen Koike  |   News & Events

This initial version includes static checks (checkpatch and smatch for now) and build tests across various architectures and configurations, and introduces a flexible 'scenarios' mechanism for subsystem-specific extensions.

Patch submitted to introduce GitLab-CI pipeline for Linux kernel testing

NVK is now ready for prime time

February 28, 2024 by Faith Ekstrand  |   News & Events

The merge request has landed, the non-conformant implementation warnings are gone, and NVK's Meson configuration now reads "nouveau" instead of "nouveau-experimental". It's now time to start shipping NVK to users!

NVK is now ready for prime time

Smells like team spirit: Meet our newest Collaborans!

February 26, 2024 by Kara Bembridge  |   News & Events

We've recently had some new faces join the team and we are delighted that our talented new joiners have readily jumped in to advance the open source mission.

Smells like team spirit: Meet our newest Collaborans!

FOSDEM 2024 - Recorded presentations (videos) now available

February 15, 2024 by Mark Filion  |   News & Events

Collabora's engineers presented six talks over the course of the weekend, with topics including a review of recent improvements to GStreamer, a look at the state of video offloading on the Linux desktop, and more.

FOSDEM 2024 - Recorded presentations (videos) now available

A framework to share analytics data in GStreamer

February 13, 2024 by Daniel Morin  |   News & Events

Engineers have widely adopted GStreamer to build video analytics pipelines, and while many companies have indeed built their machine learning analysis framework around GStreamer, no one had made the effort to contribute upstream, until now.

A framework to share analytics data in GStreamer

Wine on Wayland: A year in review (and a look ahead)

January 30, 2024 by Alexandros Frantzis  |   News & Events

2023 was a great year for the Wayland driver for Wine. After several merge requests, many people are now already able to use the latest Wine release to enjoy some of their favorite Windows applications in a completely X11-free environment!

Wine on Wayland: A year in review (and a look ahead)

WhisperFusion: Ultra-low latency conversations with an AI chatbot

January 25, 2024 by Marcus Edel  |   News & Events

By creating a real-time AI chatbot communication system using WhisperLive and WhisperSpeech, we have addressed the unnatural delay in current bot interactions for seamless conversation.

WhisperFusion: Ultra-low latency conversations with an AI chatbot

First in line for FOSDEM 2024: GStreamer, LAVA workloads & more!

January 18, 2024 by Kara Bembridge  |   News & Events

With many dedicated souls willing to endure a FOSDEM queue, Collabora's engineers will be giving 6 talks spread out amongst multiple devrooms including Open Media and Testing & Continuous delivery.

First in line for FOSDEM 2024: GStreamer, LAVA workloads & more!

Kernel 6.7: New year, new Linux!

January 11, 2024 by Eugen Hristev  |   News & Events

Collabora's kernel team made a number of key contributions including a new kselftest for verifying driver probe of Devicetree-based platforms, multiple improvements to further improve support for MediaTek SoCs found in Chromebooks, and more.

Kernel 6.7: New year, new Linux!

Weston 13.0 release: Backends consolidation

December 21, 2023 by Marius Vlad  |   News & Events

Weston 13.0 brings multiple fixes and important changes, notably the ability to load multiple backends simultaneously. This can be used to load VNC, RDP, or PipeWire backends for remote access alongside the native DRM backend.

Weston 13.0 release: Backends consolidation

NVK holiday update: What we've achieved, and where we're headed

December 20, 2023 by Faith Ekstrand  |   News & Events

As 2023 draws to a close, I wanted to give a quick update on NVK, what's happened this year, and where we'll be headed in 2024. While previous posts have focused primarily on the technical details, this post will be more geared towards users.

NVK holiday update: What we've achieved, and where we're headed

WhisperSpeech makes its way to AI.dev

December 07, 2023 by Mark Filion  |   News & Events

Collabora is headed to California to take part in the inaugural edition of AI​.dev: Open Source GenAI & ML Summit, a new event which aims to bring together the brightest developers from around the world to shape the trajectory of open source AI.

WhisperSpeech makes its way to AI.dev

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.