News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

Upcoming events: VR, NAB & Khronos

April 18, 2017 by Mark Filion  |   News and Events

Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam

Upcoming events: VR, NAB & Khronos

Tracing user space and OS interactions

April 10, 2017 by Gabriel Krisman Bertazi  |   Blog

Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.

Tracing user space and OS interactions

Ubuntu rejoins the GNOME fold

April 05, 2017 by Daniel Stone  |   Blog

Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.

Ubuntu rejoins the GNOME fold

Using gcc sanitisers to get a nasty bug fixed

February 18, 2020 by Andrej Shadura  |   Blog

When a bug surprises you when doing Apertis packaging of a typical vendor code signing tool, it's time to debug it using the compiler's built-in tools.

Using gcc sanitisers to get a nasty bug fixed

FOSDEM 2020 - Recorded presentations (videos)

February 05, 2020 by Mark Filion  |   Blog

From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track.

FOSDEM 2020 - Recorded presentations (videos)

Opening up Mali T720

December 20, 2019 by Alyssa Rosenzweig  |   Blog

If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!

Opening up Mali T720

New graphing tool for PipeWire debugging

December 09, 2019 by Julian Bouzas  |   Blog

PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.

New graphing tool for PipeWire debugging

Building GStreamer on Windows

November 26, 2019 by Aaron Boxer  |   Blog

With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.

Building GStreamer on Windows

Zink: Fall Update

October 24, 2019 by Erik Faye-Lund  |   Blog

I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.

Zink: Fall Update

Adding stateless support to vicodec

October 09, 2019 by Dafna Hirschfeld  |   Blog

Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.

Adding stateless support to vicodec

Why HDCP support in Weston is a good thing

October 03, 2019 by Pekka Paalanen  |   Blog

What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.

Why HDCP support in Weston is a good thing

Virglrenderer and the state of virtualized virtual worlds

August 28, 2019 by Gert Wollny  |   Blog

With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.

Virglrenderer and the state of virtualized virtual worlds

Panfrost & Wayland on a Rockchip board

August 06, 2019 by Rohan Garg  |   Blog

Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.

Panfrost & Wayland on a Rockchip board

What's new in OpenXR 1.0 & Monado?

August 02, 2019 by Ryan Pavlik  |   Blog

As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.

What's new in OpenXR 1.0 & Monado?

Zink: Summer Update & SIGGRAPH 2019

July 25, 2019 by Erik Faye-Lund  |   Blog

There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!

Zink: Summer Update & SIGGRAPH 2019

Linux Kernel 5.4

December 02, 2019 by Enric Balletbò i Serra  |   News & Events

Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.

Linux Kernel 5.4

And the Collabora family keeps growing!

November 20, 2019 by Jassie Badion  |   News & Events

As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!

And the Collabora family keeps growing!

GStreamer & automated testing in Lyon

October 30, 2019 by Mark Filion  |   News & Events

Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.

GStreamer & automated testing in Lyon

A new home for KernelCI

October 28, 2019 by Guillaume Tucker  |   News & Events

The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.

A new home for KernelCI

Embedded Linux Conference Europe 2019

October 25, 2019 by Mark Filion  |   News & Events

Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.

Embedded Linux Conference Europe 2019

Open graphics in Montreal

September 30, 2019 by Mark Filion  |   News & Events

Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

Open graphics in Montreal

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Linaro Virtual Connect

8-10 September, Online

XDC 2021

15-17 September, Online

Linux Plumbers Conference

20-24 September, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.