News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Debian armhf VM on arm64 server

June 20, 2017 by Sjoerd Simons  |   Blog

At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.

Debian armhf VM on arm64 server

NVMe: Officially faster for emulated controllers!

June 13, 2017 by Helen Koike  |   Blog

The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!

NVMe: Officially faster for emulated controllers!

Android: NXP i.MX6 Buffer Modifier Support

June 05, 2017 by Robert Foss  |   Blog

GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.

Android: NXP i.MX6 Buffer Modifier Support

Outreachy 2017

June 02, 2017 by Mark Filion  |   News & Events

Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.

Outreachy 2017

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

FOSDEM 2020

January 23, 2020 by Mark Filion  |   News & Events

In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans!

FOSDEM 2020

Meet the newest Collaborans!

January 16, 2020 by Erica Ryoo  |   News & Events

What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!

Meet the newest Collaborans!

Linux Kernel 5.4

December 02, 2019 by Enric Balletbò i Serra  |   News & Events

Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.

Linux Kernel 5.4

And the Collabora family keeps growing!

November 20, 2019 by Jassie Badion  |   News & Events

As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!

And the Collabora family keeps growing!

GStreamer & automated testing in Lyon

October 30, 2019 by Mark Filion  |   News & Events

Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.

GStreamer & automated testing in Lyon

A new home for KernelCI

October 28, 2019 by Guillaume Tucker  |   News & Events

The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.

A new home for KernelCI

Embedded Linux Conference Europe 2019

October 25, 2019 by Mark Filion  |   News & Events

Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.

Embedded Linux Conference Europe 2019

Open graphics in Montreal

September 30, 2019 by Mark Filion  |   News & Events

Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

Open graphics in Montreal

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Arm DevSummit 2021

19-21 October, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.