News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Setting up QEMU-KVM for kernel development

January 16, 2017 by Frédéric Dalleau  |   Blog

A look at the fundamentals of building and booting a kernel in QEMU using debootstrap, so you have the needed infrastructure to test your kernel changes in QEMU.

Setting up QEMU-KVM for kernel development

Collabora Contributions to Linux Kernel 4.9

December 14, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.9 was released this week and once more Collabora developers took part on the kernel development cycle. This time we contributed 36 patches by 11 different developers, our highest number of single contributors in a kernel release ever. Remember…

Collabora Contributions to Linux Kernel 4.9

GStreamer meets HotDoc

November 29, 2016 by Mark Filion  |   News and Events

Some exciting news today as GStreamer launches its redesigned documentation site, complete with dynamic navigation, search function and new tutorials. This new iteration is powered by HotDoc, a tool created by Collabora's Mathieu Duponchelle!

GStreamer meets HotDoc

A tale of cylinders and shadows

November 22, 2016 by Gustavo Noronha  |   Blog

Our ongoing work on improving WebKitGTK+ performance brought us to take a closer look as to why GTK+ was experiencing significant speed issues when used with Wayland and HiDPI screens, revealing the root cause to be within the lower level toolkit.

A tale of cylinders and shadows

How continuous integration can help you keep pace with the Linux kernel

November 08, 2016 by Tomeu Vizoso  |   Blog

Almost all of Collabora's customers use the Linux kernel on their products. Often they will use the exact code as delivered by the SBC vendors and we'll work with them in other parts of their software stack. But it's becoming increasingly common for our…

How continuous integration can help you keep pace with the Linux kernel

Collabora contributions to GStreamer 1.10 - Part 2

November 03, 2016 by Olivier Crête  |   Blog

In the first part of my review of Collabora's participation in GStreamer 1.10, I discussed the work done by Guillaume & Nicolas around leak tracing, acoustic echo cancellation, Wayland, V4L, etc. Today, I'll go over the contributions from the rest of…

Collabora contributions to GStreamer 1.10 - Part 2

Collabora contributions to GStreamer 1.10

November 02, 2016 by Olivier Crête  |   Blog

Yesterday, we celebrated the release of GStreamer 1.10, the culmination of 7 months of very hard work from the GStreamer community. Collabora's multimedia team is extremely proud of our contributions to this new major feature release.

Collabora contributions to GStreamer 1.10

Linux Plumbers Conference 2016

October 26, 2016 by Mark Filion  |   News and Events

Collabora is proud to be once again sponsoring the annual Linux Plumbers Conference, the developer conference that brings together the top developers working on the “plumbing” of Linux: kernel subsystems, core libraries, windowing systems, etc.

Linux Plumbers Conference 2016

Open Build Service in Debian - Part 2

October 25, 2016 by Héctor Orón Martínez  |   Blog

In the previous post, I gave an overview of the Open Build Service software architecture. In this second part, a tutorial on setting up a package build with OBS from Debian packages is presented.

Open Build Service in Debian - Part 2

Open Build Service in Debian - Part 1

October 24, 2016 by Héctor Orón Martínez  |   Blog

openSUSE distributions’ build system is based on a generic framework named Open Build Service (OBS), I have been using these tools in my work environment, and I have to say, as Debian developer, that it is a great tool. In this blog post I plan for you…

Open Build Service in Debian - Part 1

Mainline Explicit Fencing - Part 2

October 18, 2016 by Gustavo Padovan  |   Blog

In the first part we covered the main concepts behind Explicit Synchronization for the Linux Kernel. Now in the second part of the series we are going to look to the Android Sync Framework, the first (out-of-tree) Explicit Fencing implementation for the…

Mainline Explicit Fencing - Part 2

Making Viewer UIs for Pitivi

October 13, 2016 by Lubosz Sarnecki  |   Blog

Being someone who has already experimented with two transformation box approaches for Pitivi in the past, maintainers thought I might be the right person to do a modern one. Creating a user interface for a video transformation requires three things: the…

Making Viewer UIs for Pitivi

Paving the way for high bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

Paving the way for high bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

Linux App Summit 2020

November 12, 2020 by Mark Filion  |   News & Events

Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!

Linux App Summit 2020

Monado update: Passing conformance, Android support & more

November 02, 2020 by Jakob Bornecrantz  |   News & Events

Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.

Monado update: Passing conformance, Android support & more

Open Source Summit Europe & ELCE 2020

October 22, 2020 by Mark Filion  |   News & Events

The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!

Open Source Summit Europe & ELCE 2020

Kernel 5.9: Onwards and upwards

October 22, 2020 by Mylène Josserand  |   News & Events

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.

Kernel 5.9: Onwards and upwards

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Automotive Linux Summit

2-4 December, Online

Live Embedded Event

3 December, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2020. All rights reserved. Privacy Notice. Sitemap.