June 25, 2018 by Olivier Crête | Blog
Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.
June 11, 2018 by Omar Akkila | Blog
Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.
June 05, 2018 by Mark Filion | Blog
In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.
June 04, 2018 by Enric Balletbò i Serra | News & Events
Linus Torvalds has now released the official Linux 4.17, so it’s time for our traditional blog post summing up our contributions to the latest version of the Linux kernel, which include a number of patches to the DRM subsystem.
May 29, 2018 by Omar Akkila | Blog
At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.
May 18, 2018 by Zeeshan Ali | Blog
Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.
May 09, 2018 by Elie Tournier | Blog
A few months ago, Robert Foss wrote a blog post about virtualizing GPU Access. Here's a look at some of the major improvements that have landed upstream since then, including QEMU using OpenGL ES acceleration, as well as our plans for the future.
May 01, 2018 by Olivier Crête | Blog
Generously hosted by Axis in the beautiful Lund, Sweden, the annual spring hackfest is an occasion for the community to get together to bond, but also to co-ordinate the next half year of development of the GStreamer multimedia framework.
April 20, 2018 by Mark Filion | News & Events
This weekend, we're headed to Gothenburg, Sweden, to meet the Nordic FOSS community at foss-north, a free / open source conference covering both software and hardware from the technical perspective!
April 17, 2018 by Robert Foss | Blog
The i.MX 6 platform has for the past few years enjoyed a large effort to add upstream support to Linux and surrounding projects. The newly introduced i.MX 8 is seeing lots of work being done, despite hardware being still difficult to get access to.
April 06, 2018 by Mark Filion | News & Events
Attending the NAB Show in Las Vegas? Make sure to stop by Collabora's booth, #N2908VR in the North Hall, and get a firsthand look at the latest in Open Source software integration!
January 10, 2018 by Guy Lunardi | Blog
Widely recognized as the best conference of its kind in Europe, the 2018 edition of FOSDEM promises to be no different, with a jam-packed schedule of over 600 lectures, lightning talks, developer rooms, and more.
December 22, 2017 by Gustavo Noronha | Blog
We recently assisted a customer who wanted to upgrade their system from X11 to Wayland. The problem: they use CEF as a runtime for web applications and CEF was not Wayland-ready.
December 11, 2017 by Daniel Stone | Blog
Recently, Sean Paul from Google's ChromeOS team, submitted a patch series to enable HDCP - or High-bandwidth Digital Content Protection - support for the Intel display driver.
December 01, 2017 by Robert Foss | Blog
Getting ChromiumOS building is reasonably easy, but running it under QEMU requires some work. Here's a guide to help you build all of the software needed to do so.
November 27, 2017 by Alexandros Frantzis | Blog
Ozone is Chromium’s next-gen platform abstraction layer for graphics and input. When developing either Ozone itself or an application that uses Ozone, it is often beneficial to be able to run the code on the development machine, which is usually a typical…
November 17, 2017 by George Kiagiadakis | Blog
Earlier this year I worked on a certain GStreamer plugin that is called “ipcpipeline”. This plugin provides elements that make it possible to interconnect GStreamer pipelines that run in different processes. In this blog post I am going to explain how…
November 09, 2017 by Tomeu Vizoso | Blog
Running crosvm outside Chromium OS is quite easy, with the only complication being that minijail isn't widely packaged in distros. In these instructions, we hack around the issue with linker environment variables so we don't have to install it properly.
November 06, 2017 by Thierry Escande | Blog
Kmemleak allows you to track possible memory leaks inside the Linux kernel. Basically, it tracks dynamically allocated memory blocks in the kernel and reports those without any reference left and that are therefore impossible to free.
October 17, 2017 by Gustavo Noronha | Blog
Earlier this month I had the pleasure of attending the Web Engines Hackfest, hosted by Igalia at their offices in A Coruña, and also sponsored by my employer, Collabora, Google and Mozilla. It has grown a lot and we had many new people this year.
October 06, 2017 by Gabriel Krisman Bertazi | Blog
In this post, I will show one more example of how easy it is to disrupt performance of a modern CPU, and also run a quick discussion on why performance matters - as well as present a few cases where it shouldn't matter.
September 23, 2017 by Guy Lunardi | Blog
Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
Here are the events we'll be attending in the coming weeks – come say hello!
October 1-7, Barcelona, Spain
October 4-6, Minneapolis, MN, USA
October 11-13, London, UK
August 8-11, Phoenix, AZ, USA