October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
February 09, 2017 by Varad Gautam | Blog
Over the past few weeks, I have been working for Collabora on plumbing DRM format modifier support across a number of components in the graphics stack. This post documents the work and the related consequences/implications.
January 26, 2017 by Gustavo Padovan | Blog
In the last two articles we talked about how Explicit Fencing can help the graphics pipeline in general and what happened on the effort to upstream the Android Sync Framework. Now on the third and final post of this series we will go through the Explicit…
January 24, 2017 by Tomeu Vizoso | Blog
Last month I gave a short talk about the Chamelium board from the ChromeOS team, a board that is getting more and more usage outside of Google as it can help you automate the testing of your display (and not only!) code and hardware.
January 16, 2017 by Frédéric Dalleau | Blog
A look at the fundamentals of building and booting a kernel in QEMU using debootstrap, so you have the needed infrastructure to test your kernel changes in QEMU.
December 14, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.9 was released this week and once more Collabora developers took part on the kernel development cycle. This time we contributed 36 patches by 11 different developers, our highest number of single contributors in a kernel release ever. Remember…
November 22, 2016 by Gustavo Noronha | Blog
Our ongoing work on improving WebKitGTK+ performance brought us to take a closer look as to why GTK+ was experiencing significant speed issues when used with Wayland and HiDPI screens, revealing the root cause to be within the lower level toolkit.
November 08, 2016 by Tomeu Vizoso | Blog
Almost all of Collabora's customers use the Linux kernel on their products. Often they will use the exact code as delivered by the SBC vendors and we'll work with them in other parts of their software stack. But it's becoming increasingly common for our…
November 03, 2016 by Olivier Crête | Blog
In the first part of my review of Collabora's participation in GStreamer 1.10, I discussed the work done by Guillaume & Nicolas around leak tracing, acoustic echo cancellation, Wayland, V4L, etc. Today, I'll go over the contributions from the rest of…
November 02, 2016 by Olivier Crête | Blog
Yesterday, we celebrated the release of GStreamer 1.10, the culmination of 7 months of very hard work from the GStreamer community. Collabora's multimedia team is extremely proud of our contributions to this new major feature release.
October 25, 2016 by Héctor Orón Martínez | Blog
In the previous post, I gave an overview of the Open Build Service software architecture. In this second part, a tutorial on setting up a package build with OBS from Debian packages is presented.
October 24, 2016 by Héctor Orón Martínez | Blog
openSUSE distributions’ build system is based on a generic framework named Open Build Service (OBS), I have been using these tools in my work environment, and I have to say, as Debian developer, that it is a great tool. In this blog post I plan for you…
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA